Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
my running post 5.0 wish list
#11
That was supposed to be the whole point of it being generic, that it wouldn't have to be updated. But they screwed that pooch pretty much.
Dean Roddey
Explorans limites defectum
Reply
#12
BTW, don't expect too much in 5.1 because the HTML based client is going to be the far and away top priority. Getting that done is most definitely a survival issue, and it will be taken seriously. Other, smallish stuff can be done of course. But we have to keep our eyes on the prize for 5.1. If we can get a good HTML client out there for portable and non-Windows devices, and with all of this stuff being done for 5.0, we will finally really be able to go out there and compete.
Dean Roddey
Explorans limites defectum
Reply
#13
yeah, but some of the stuff listed is small-ish and would provide a lot of good value, and other stuff would really enhance first-timer usability. think of this list when you need to get away from the grind and have some time to add a small bit or two.
do the needful ...
Hue | Sonos | Harmony | Elk M1G // Netatmo / Brultech
Reply
#14
Okay, here is one you can take off the list :-)

The IV /binding wasn't working, and I needed it to use my CQC Server as my .wav output to my audio system. The PlayWav() didn't work in Win7 and PlayIVWav() did - but only when I didn't have multiple RDP logins to that computer. Since I have upgraded to Win10, the PlayWav is back working, so the PlayWavIV() isn't needed at least in my setup.

Probably a low priority, but all is good on my end now.
Reply
#15
Dean Roddey Wrote:That was supposed to be the whole point of it being generic, that it wouldn't have to be updated. But they screwed that pooch pretty much.

Perhaps it is a mater of Yamaha adding new function types and the driver not knowing what to do with the new types, can't handle, and so won't connect. There was a fairly big streaming technology jump between the version of the protocol doc used to build the driver (6 years old) and the most current documentation. Yamaha V2 Driver Error was the thread we discussed back in January.

-Ben
Reply
#16
updated to add increased hue support for groups/scenes and tunable white bulb.
do the needful ...
Hue | Sonos | Harmony | Elk M1G // Netatmo / Brultech
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Curious About Usage Post Public Domain kblagron 17 1,915 09-24-2021, 09:00 AM
Last Post: Dean Roddey
  Error Running Installer to Enable SSL gReatAutomation 2 1,115 10-26-2020, 07:41 AM
Last Post: gReatAutomation
  Z-Wave Device List simplextech 2 1,399 02-01-2020, 07:24 AM
Last Post: simplextech
  Deleting Drivers From AI "Add Drivers List" kblagron 1 1,057 05-16-2019, 09:18 AM
Last Post: Dean Roddey
  why master server needs DHCP client running? lleo 4 2,387 01-04-2019, 01:13 PM
Last Post: Dean Roddey
  Http Post zra 17 7,099 08-05-2018, 01:55 PM
Last Post: zra
  HTTP Post zra 7 3,515 05-18-2018, 08:47 AM
Last Post: zra
  Drivers and Hardware List wusupwchu 3 2,194 02-20-2018, 04:35 PM
Last Post: Dean Roddey
  String list in actions znelbok 3 2,623 11-06-2017, 04:10 PM
Last Post: Dean Roddey
  Motion Event Running Twice? zra 2 2,588 07-31-2017, 08:15 PM
Last Post: zra

Forum Jump:


Users browsing this thread: 1 Guest(s)