Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
zwave device configuration
#1
after reading the zwave thread over on CT, i gave it another go for funsies. blew away the network and removed all modules from the VRUSB and RFIT, then readded them all using the Z-Stick, and using domoticz managed to replicate to the VRC0P.

believe it or not, everything seems to be working except i have an extra field for the motion sensor for #TEMP.

the motion is from a GoControl kit, a rebranded Linear, but I am using the Monoprice 10796 config in the driver and the #TEMP never works. is there a way to get rid of the temperature bit of that motion sensor? if not, can we get the actual device added into the driver?
do the needful ...
Hue | Sonos | Harmony | Elk M1G // Netatmo / Brultech
Reply
#2
What's the exact model of the device?
Dean Roddey
Explorans limites defectum
Reply
#3
on the back of the device -

Model: WAPIRZ-1
do the needful ...
Hue | Sonos | Harmony | Elk M1G // Netatmo / Brultech
Reply
#4
The Z-Wave Alliance product info web site thingie has not been responding for the last couple days, so I've not managed to look it up yet.
Dean Roddey
Explorans limites defectum
Reply
#5
Still not working. It's always been flaky, but now it now it won't load at all, in Chrome or IE.
Dean Roddey
Explorans limites defectum
Reply
#6
There's a bit of info in their 'user manual'. Can you enable the trace file, and then breath on it or something to change the temp so that it will send out a temp report so that we can look at it?

Write "EnableTrace Yes" to the InvokeCmd field to enable the file. Then go get intimate with it, then EnableTrace No to turn off the tracing. Then post the file at CQCData\Server\Data\ZWaveLevi2\Trace.Txt and post it.
Dean Roddey
Explorans limites defectum
Reply
#7
here is the trace. two things of note - my multisensor is not working anymore, just red in the browser and i dont see any response with the trace. but it does seem to work since the little red light blinks when it detects motion. not sure what's going on there. and the motion sensor that started this post is node 5.

nodes 4,6,7 are contact closures that are working perfectly.

please don't jinx my system - it has literally taken a year to get these 3 guys to work as expected. :-D

Code:
Z-Wave V2 Trace
  Version: 1.0,  Moniker: jk_sensors,  Time: 8:58:32 PM
----------------------------------------------------

New ZWMsg  8:58:38 PM
  Raw Text=005:032,001,255
  Type=Gen Report,  Node=5,  InstId=0,  Secure=No,  Bytes=3,  CmdClass=32/0x20,  Cmd=1/0x1
New ZWMsg  8:58:38 PM
  Raw Text=005:113,005,007,255,000,255,007,002,000,000
  Type=Gen Report,  Node=5,  InstId=0,  Secure=No,  Bytes=10,  CmdClass=113/0x71,  Cmd=5/0x5
New ZWMsg  9:00:07 PM
  Raw Text=005:049,005,001,009,071
  Type=Gen Report,  Node=5,  InstId=0,  Secure=No,  Bytes=5,  CmdClass=49/0x31,  Cmd=5/0x5
    Type=1,    Precision=0,    Scale=1,    Size=1
New ZWMsg  9:00:18 PM
  Raw Text=007:032,001,255
  Type=Gen Report,  Node=7,  InstId=0,  Secure=No,  Bytes=3,  CmdClass=32/0x20,  Cmd=1/0x1
New ZWMsg  9:00:18 PM
  Raw Text=007:128,003,082,000
  Type=Gen Report,  Node=7,  InstId=0,  Secure=No,  Bytes=4,  CmdClass=128/0x80,  Cmd=3/0x3
New ZWMsg  9:00:19 PM
  Raw Text=007:032,001,000
  Type=Gen Report,  Node=7,  InstId=0,  Secure=No,  Bytes=3,  CmdClass=32/0x20,  Cmd=1/0x1
New ZWMsg  9:00:19 PM
  Raw Text=007:128,003,081,000
  Type=Gen Report,  Node=7,  InstId=0,  Secure=No,  Bytes=4,  CmdClass=128/0x80,  Cmd=3/0x3
New ZWMsg  9:00:21 PM
  Raw Text=004:032,001,255
  Type=Gen Report,  Node=4,  InstId=0,  Secure=No,  Bytes=3,  CmdClass=32/0x20,  Cmd=1/0x1
New ZWMsg  9:00:21 PM
  Raw Text=004:113,005,007,255,000,255,007,002,000,000
  Type=Gen Report,  Node=4,  InstId=0,  Secure=No,  Bytes=10,  CmdClass=113/0x71,  Cmd=5/0x5
New ZWMsg  9:00:21 PM
  Raw Text=004:032,001,000
  Type=Gen Report,  Node=4,  InstId=0,  Secure=No,  Bytes=3,  CmdClass=32/0x20,  Cmd=1/0x1
New ZWMsg  9:00:21 PM
  Raw Text=004:113,005,007,000,000,255,007,002,000,000
  Type=Gen Report,  Node=4,  InstId=0,  Secure=No,  Bytes=10,  CmdClass=113/0x71,  Cmd=5/0x5
New ZWMsg  9:00:23 PM
  Raw Text=006:032,001,255
  Type=Gen Report,  Node=6,  InstId=0,  Secure=No,  Bytes=3,  CmdClass=32/0x20,  Cmd=1/0x1
New ZWMsg  9:00:23 PM
  Raw Text=006:113,005,007,255,000,255,007,002,000,000
  Type=Gen Report,  Node=6,  InstId=0,  Secure=No,  Bytes=10,  CmdClass=113/0x71,  Cmd=5/0x5
New ZWMsg  9:00:24 PM
  Raw Text=006:032,001,000
  Type=Gen Report,  Node=6,  InstId=0,  Secure=No,  Bytes=3,  CmdClass=32/0x20,  Cmd=1/0x1
New ZWMsg  9:00:24 PM
  Raw Text=006:113,005,007,000,000,255,007,002,000,000
  Type=Gen Report,  Node=6,  InstId=0,  Secure=No,  Bytes=10,  CmdClass=113/0x71,  Cmd=5/0x5
do the needful ...
Hue | Sonos | Harmony | Elk M1G // Netatmo / Brultech
Reply
#8
On the sensor, it looks normal enough. It's sending multi-level sensor notifications. I'll set up a new device info file for it for 4.8.1, which will probably happen pretty soon.
Dean Roddey
Explorans limites defectum
Reply
#9
cool deal. i learned some patience over the past week and got the VRUSB working with these basic sensors. im sort of excited about this ...
do the needful ...
Hue | Sonos | Harmony | Elk M1G // Netatmo / Brultech
Reply
#10
when you have a second, can you explain the difference between this model and the Monoprice 10796 that you already support? im curious because everything ive read online says that they are the same exact model, rebranded from Linear.
do the needful ...
Hue | Sonos | Harmony | Elk M1G // Netatmo / Brultech
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  How do i pick up OmniPro configuration changes? xlurkr 5 1,615 07-29-2020, 03:16 PM
Last Post: xlurkr
  Update on ZWave & RadioRA2 Multi-Gang and CQC gReatAutomation 1 1,287 01-31-2020, 01:18 PM
Last Post: Dean Roddey
  Simple HTTP Call to Device from CQC mjwhite214 19 7,418 01-23-2020, 03:35 PM
Last Post: simplextech
  ZWave / Add all devices or just as you need them? gReatAutomation 2 1,406 09-16-2019, 01:42 PM
Last Post: gReatAutomation
  ZWave integration frustrations kjaerligkatt 166 42,840 01-03-2019, 05:29 AM
Last Post: kjaerligkatt
  zWave, how I hate thee. need to redo network IVB 23 8,566 12-01-2018, 11:35 PM
Last Post: IVB
  Device varible in email greyjeep 3 2,373 01-09-2018, 05:21 PM
Last Post: Dean Roddey
  USB ZWave Controller Configuration bobskie708 6 6,284 11-30-2017, 04:07 PM
Last Post: Dean Roddey
  MS Speech Platform configuration on Windows Server 2012 mbrown 3 4,191 08-30-2017, 09:34 AM
Last Post: Dean Roddey
  Harmony Hub Device Control jkmonroe 6 4,989 07-03-2016, 02:36 PM
Last Post: potts.mike

Forum Jump:


Users browsing this thread: 1 Guest(s)