Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Isy Driver waiting for Comm Resource?
#51
Dean Roddey Wrote:Is that actually your own external IP address perhaps?
Don't know, but shouldn't it be using my CQC IP address?
tia, Ron

My HT equipment I want to control by CQC (some day hopefully)
Yamaha CX-A5100, Dune HD pro 4k, Dune HD Pro 4k plus, ISY 994i, LG 86" 4k FP, and a projector in the future
Reply
#52
In theory it should be, but you should check to see if that's your public IP address. If so, then it could be because you have a port forward set up perhaps. If it's not your own public IP, then that would have to point to something else altogether.
Dean Roddey
Explorans limites defectum
Reply
#53
Dean Roddey Wrote:In theory it should be, but you should check to see if that's your public IP address. If so, then it could be because you have a port forward set up perhaps. If it's not your own public IP, then that would have to point to something else altogether.
I just checked via http://www.DSLReports.com and it is not my public IP address either.
tia, Ron

My HT equipment I want to control by CQC (some day hopefully)
Yamaha CX-A5100, Dune HD pro 4k, Dune HD Pro 4k plus, ISY 994i, LG 86" 4k FP, and a projector in the future
Reply
#54
Oh, wait, I know what happened. You probably aren't on the latest CQC version, and you installed a driver pack previously. That got overwritten when you ran the installer again. Re-install the latest driver pack and then do a reconfigure. This is going to happen until you install a new version of CQC that actually has all the latest fixes in it.
Dean Roddey
Explorans limites defectum
Reply
#55
Dean Roddey Wrote:Oh, wait, I know what happened. You probably aren't on the latest CQC version, and you installed a driver pack previously. That got overwritten when you ran the installer again. Re-install the latest driver pack and then do a reconfigure. This is going to happen until you install a new version of CQC that actually has all the latest fixes in it.
Thanks Dean, That worked. Smile
tia, Ron

My HT equipment I want to control by CQC (some day hopefully)
Yamaha CX-A5100, Dune HD pro 4k, Dune HD Pro 4k plus, ISY 994i, LG 86" 4k FP, and a projector in the future
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  RFXcom driver or Tellstick driver kernal69 8 3,730 01-25-2020, 03:06 PM
Last Post: simplextech
  Dune driver wait for config error ellisr63 44 13,274 11-28-2019, 06:35 PM
Last Post: ellisr63
  TTS II Driver requirements znelbok 1 1,243 05-20-2019, 09:34 PM
Last Post: Dean Roddey
  CQC to PowerView Hub via Serial Driver Deane Johnson 18 8,617 05-14-2018, 01:11 PM
Last Post: Deane Johnson
  HAI Driver Issue avtexan 6 4,202 04-06-2018, 02:06 PM
Last Post: Dean Roddey
  Monoprice 8x8 HDMI matrix Driver NightLight 13 10,134 09-04-2017, 09:45 AM
Last Post: Dean Roddey
  ELK V2 Driver - AreaArm field & Triggers? sic0048 4 4,066 08-19-2017, 04:46 PM
Last Post: Dean Roddey
  UPB Driver Issue tcmcgec 6 5,875 01-27-2017, 07:18 PM
Last Post: Dean Roddey
  HAI OmniProII Driver problems MBurger 4 4,491 12-24-2016, 07:59 AM
Last Post: Dean Roddey
  Onkyo NR646 and Universal Integra Driver? Sendero 6 5,192 10-31-2016, 11:22 PM
Last Post: Sendero

Forum Jump:


Users browsing this thread: 1 Guest(s)