Posts: 474
Threads: 61
Joined: May 2012
I think the correct answer is in the amplifier, but just to make sure...
I now have a Nuvo Concerto playing music through a file_tag repo. Volume can be set in both places. My guess is that file tag should be set high and nuvo should be used to set listening volume.
Russ
Flamin' Noobie...
Warp speed now and don't give me any of that dilythium crystal crap!
Posts: 40,483
Threads: 491
Joined: Aug 2002
It wouldn't be the repo but the renderer driver you mean. You could do it either way presumably. But probably setting it at the amp would be more efficient, since then you aren't running the amps any harder than you have to. So just set the renderer at 100% and adjust at the amp.
Dean Roddey
Explorans limites defectum
Posts: 55
Threads: 16
Joined: Jan 2007
Dean Roddey Wrote:It wouldn't be the repo but the renderer driver you mean. You could do it either way presumably. But probably setting it at the amp would be more efficient, since then you aren't running the amps any harder than you have to. So just set the renderer at 100% and adjust at the amp.
When you say set the renderer at 100%, do you do this when you configure the audio driver (mine is the CQSL audio player v2) and when you enter a value for the inital load value? Then I guess you have to enter the value of 100.
Posts: 40,483
Threads: 491
Joined: Aug 2002
Yeh, if you just want to peg the renderer at unity gain and not have to ever set it, then set it in the driver install prompt to 100%.
Dean Roddey
Explorans limites defectum
