Posts: 7,970
Threads: 554
Joined: Mar 2005
Anyone got a working SageTV HDx00 driver connected? Can you please post what you have in your Sage.properties file, and how you configured CQC?
I can't seem to get it to work.
Posts: 1,592
Threads: 115
Joined: Dec 2006
12-15-2013, 05:58 AM
(This post was last modified: 12-15-2013, 06:16 AM by SomeWhatLost.)
it works wonderfully... and more to the point it should all "Just Work"
you shouldn't need to do anything with the properties anymore, SageTCPserver should do it all automatically now...
you did remember to install SageTCPserver?
but anyway, here is the relevant lines from prop file:
Code: sageTCPServer/client=127.0.0.1\:9262,192.168.1.128\:9264
sageTCPServer/extender=0023a500057d.9260,001d6a4cf697.9261,001d6a4c019a.9263
note, those are the MAC for MY extenders... probably wont do you much good...
oh also just in case you forgot, as it has been a while, CQC talks to Sage server, Sage server talks to extender... so for CQC extender driver, you need to use the IP address of the sage Server, and just use the port # of the extender to be controlled...
NOTE: As one wise professional something once stated, I am ignorant & childish, with a mindset comparable to 9/11 troofers and wackjob conspiracy theorists. so don't take anything I say as advice...
Posts: 7,970
Threads: 554
Joined: Mar 2005
thanks. Yep, thats what I have, but if I use 192.168.1.x in driver I get "Wait for connect", if I use 127.0.0.1 I get "Wait for Comm Resource". Which is also very strange since that should be the same response since its the same box.
Posts: 7,970
Threads: 554
Joined: Mar 2005
Still nothing. Doesn't even like talking to my SageClient/laptop. I get "wait for comm resource".
Another idea: If you double click on the driver in CQC, what version do you have? I have V1.8, I wonder if there's something later.
Posts: 1,592
Threads: 115
Joined: Dec 2006
I have version 2.78
NOTE: As one wise professional something once stated, I am ignorant & childish, with a mindset comparable to 9/11 troofers and wackjob conspiracy theorists. so don't take anything I say as advice...
Posts: 3,473
Threads: 156
Joined: Jun 2005
At some point, the CQC driver package lost the ability to custom set the port used. This is OK if you only have one driver you are trying to connect, but it is really bad if you have more than one driver because all the drivers are hardcoded to use the same port.
I'm not sure what the status is with this issue. I think someone posted a fix, but check the Sage driver threads to be sure.
If you are only trying to connect one driver, make sure the port used in the CQC driver setup is the same port that you have coded into the Sage.properties file.
Brian - a long time user that rarely messes with the system now
Other systems used:
SageTV w/ cablecard tuner & multiple extenders for viewing
BlueIris and IP cameras for CCTV
Incredible PBX for home phone
Posts: 7,970
Threads: 554
Joined: Mar 2005
yeah got it working, thx.
|
