Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hunting down Marantz NR1604 protocol
#11
IVB Wrote:although, now i'm wondering if the 70wpc is going to be an issue. The SR5008 is $900 vs $650, but is 200wpc. Ugh. Thank god I only do this once every 5-8 years.

Where did you hear that it was 200wpc?
"For optimum sound quality, the SR5008 features identical power amp circuitry for all channels, including discrete power amplifier output stage design. Rated at 100 watts into 8 ohms for each of the 7 channels, the receiver provides high power and wide dynamic range with low distortion for superb surround sound." I got the info here... http://www.amazon.com/electronics/dp/B00CS4X8QE


I thought it was strange that the Marantz is more expensive than the Denon and my 4520 doesn't even do 200 wpc.
tia, Ron

My HT equipment I want to control by CQC (some day hopefully)
Yamaha CX-A5100, Dune HD pro 4k, Dune HD Pro 4k plus, ISY 994i, LG 86" 4k FP, and a projector in the future
Reply
#12
yeah I realized that last night, not sure where I read it.
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply
#13
You could always get the least expensive Marantz that has all the features you want and get PREAMP outs... Then buy a Emotiva power 3 or 5 channel power amp to get you up to the power you want. :-)
tia, Ron

My HT equipment I want to control by CQC (some day hopefully)
Yamaha CX-A5100, Dune HD pro 4k, Dune HD Pro 4k plus, ISY 994i, LG 86" 4k FP, and a projector in the future
Reply
#14
Well, I need 2 HDMI outputs (plasma & pj). Although I wonder if a splitter is reliable...
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply
#15
how many channels are you looking for for processing... 7.2, 9.2, 11.2? Is single sub ok?
tia, Ron

My HT equipment I want to control by CQC (some day hopefully)
Yamaha CX-A5100, Dune HD pro 4k, Dune HD Pro 4k plus, ISY 994i, LG 86" 4k FP, and a projector in the future
Reply
#16
Crutchfield has the Denon AVR2313... 7.2 channels, 2 HDMI outs, 6 HDMI inputs and 4k pass through for $599.99 and free shipping. If you call Craig at AVS he might have it for less or have something even better for the same or less. I believe the 3313 has 3 HDMI outs plus everything else the 2313 has.
tia, Ron

My HT equipment I want to control by CQC (some day hopefully)
Yamaha CX-A5100, Dune HD pro 4k, Dune HD Pro 4k plus, ISY 994i, LG 86" 4k FP, and a projector in the future
Reply
#17
interesting link, will have to check that out. 7.1 should work, currently only one sub, was contemplating a second but wife doesn't know that. Plus its on other side from kids bedroom, so that may not fly.
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply
#18
IVB Wrote:interesting link, will have to check that out. 7.1 should work, currently only one sub, was contemplating a second but wife doesn't know that. Plus its on other side from kids bedroom, so that may not fly.
The Denon 4520 has a mode that reduces the effects of the sub travelling through walls... Not sure how it works though. Years ago I ran 4 subs in a room and I just used RCA "Y"s to split it out to more subs. I would setup one and then disconnect it and setup another until I had done them all. When all of them were setup I hooked them all up and set my level... It worked nicely. My new 4520 will actually calibrate 2 subs individually and does 11.2.
tia, Ron

My HT equipment I want to control by CQC (some day hopefully)
Yamaha CX-A5100, Dune HD pro 4k, Dune HD Pro 4k plus, ISY 994i, LG 86" 4k FP, and a projector in the future
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Marantz AV8801 Driver Andre 34 11,499 04-19-2016, 01:16 PM
Last Post: MikeA
  Marantz SR5005 driver Dean Roddey 101 35,008 10-15-2015, 06:10 PM
Last Post: Dean Roddey
  Marantz MCR-610 M4T VW 10 6,402 06-01-2014, 06:24 AM
Last Post: Dean Roddey
  Yamaha RX-V2067 Network ethernel protocol araldit 0 3,997 11-18-2011, 10:49 AM
Last Post: araldit
  GoogleTV Anymote Protocol chmilar 3 4,696 11-18-2011, 09:57 AM
Last Post: chmilar
  Protocol Documentation Repository? znelbok 7 5,654 06-27-2011, 08:16 AM
Last Post: batwater
  Yamaha Protocol RX-A1000, RX-A2000, RX-A3000, RX-V1067 and RX-V2067 znelbok 0 4,785 06-23-2011, 07:05 PM
Last Post: znelbok
  Onkyo/Integra serial control protocol potts.mike 3 4,870 07-15-2010, 09:01 PM
Last Post: potts.mike
  Marantz DVD Driver jrlewis 70 16,684 02-17-2010, 12:21 AM
Last Post: jrlewis
  All Things A/V - Protocol website sic0048 1 3,327 09-23-2008, 09:57 PM
Last Post: znelbok

Forum Jump:


Users browsing this thread: 1 Guest(s)