strange problem

[ellisr63]

I just made a new template 1900x1280 and when I go to view it using the CQC viewer it only shows about 2/3 of the image. I even went into the CQC editor and it shows the correct size. I checked my desktop and it is also 1900x1280. Not sure where to look next... Any ideas?

tia,
Ron

[Dean Roddey]

When yous ay it only shows 2/3s, what's in the rest of the area?

[ellisr63]

When yous ay it only shows 2/3s, what's in the rest of the area?

It appears to be zoomed in... That is why I only see 2/3s of the template.

[Dean Roddey]

That's not very likely. The IV doesn't do any scaling at all. Are you sure the template is actually the size you think it is? Were you by any chance accessing it one way via an RDP session and another way directly?

[ellisr63]

Here is a screenshot...


Here is the template pack...
http://www.mediafire.com/?rjl8dol6jux94fp

[sic0048]

Well, for one, you need to be looking at it "full screen" if your template resolution matches your screen resolution. Otherwise it won't fit.

View - Full Screen

[ellisr63]

Well, for one, you need to be looking at it "full screen" if your template resolution matches your screen resolution. Otherwise it won't fit.

View - Full Screen

Here it is at full screen...


Anyone want to try the template and see if they can get full screen? No variables or anything on it... Just the Denon driver.

tia,
Ron

[Dean Roddey]

You've got to be doing something wrong. There's no way the viewer and designer would show the thing in different sizes. It just won't happen.

If you go into the designer and right click on the template background and do Set Size, what does it show as the current size of the template?

[ellisr63]

Here ya go...

[Dean Roddey]

But it's clipped there just ht same, accounting for scroll bars. So the screen resolution on that screen clearly isn't 1900x1080, or you'd be seeing almost all of it there in the designer.