Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Error with the B&K Driver
#1
I am getting an error with the upgrade to the new version in my logs - it may not be a big deal, as it hasn't affected the drivers operation. Just wanted to put it out there to see what might be causing it. I never had it on previous versions -

PHP Code:
10/22 22:17:10-CQCSERVERCQCServerCQCDrv_BKHD6_Thread9
{
    
CQCKitMEng.System.CQC.Runtime.CQCLogger.1382Status/App Status
    Error Writing Preset Cmd
Error=Can't convert '""' to a MEng.Card4 binary form Preset=7 CmdData=""
}
10/22 22:17:12-CQCSERVER, CQCServer, CQCDrv_CTHD6_Thread23
{
    CQCKit, MEng.System.CQC.Runtime.CQCLogger.1382, Status/App Status
    Error Writing Preset Cmd. Error=Value '
1F2' exceeds the limits for field ZoneFTreble Preset=6 CmdData=FF
}
10/22 22:17:18-CQCSERVER, CQCServer, CQCDrv_CTHD6_Thread23
{
    CQCKit, MEng.System.CQC.Runtime.CQCLogger.1382, Status/App Status
    Error Writing Preset Cmd. Error=Value '
1F2' exceeds the limits for field Zone30Bass Preset=7 CmdData=FF
}
10/22 22:17:18-CQCSERVER, CQCServer, CQCDrv_CTHD6_Thread23
{
    CQCKit, MEng.System.CQC.Runtime.CQCLogger.1382, Status/App Status
    Error Writing Preset Cmd. Error=Can'
t convert 'FF' to a MEng.Card4 binary form Preset=7 CmdData=FF
}
10/22 22:17:23-CQCSERVERCQCServerCQCDrv_CTHD6_Thread23
{
    
CQCKitMEng.System.CQC.Runtime.CQCLogger.1382Status/App Status
    Error Writing Preset Cmd
Error=Value '1F2' exceeds the limits for field Zone0Bass Preset=0 CmdData=FF
}
10/22 22:17:32-CQCSERVERCQCServerCQCDrv_CTHD6_Thread23
{
    
CQCKitMEng.System.CQC.Runtime.CQCLogger.1382Status/App Status
    Error Writing Preset Cmd
Error=Value '1F2' exceeds the limits for field ZoneABass Preset=1 CmdData=FF
}
10/22 22:17:38-CQCSERVERCQCServerCQCDrv_CTHD6_Thread23
{
    
CQCKitMEng.System.CQC.Runtime.CQCLogger.1382Status/App Status
    Error Writing Preset Cmd
Error=Value '1F2' exceeds the limits for field ZoneBBass Preset=2 CmdData=FF
}
10/22 22:17:38-CQCSERVERCQCServerCQCDrv_CTHD6_Thread23
{
    
CQCKitMEng.System.CQC.Runtime.CQCLogger.1382Status/App Status
    Error Writing Preset Cmd
Error=Value 'F4' exceeds the limits for field ZoneBTreble Preset=2 CmdData=80

Reply
#2
I tlooks like your receiver is sending back values that the driver doesn't consider valid. It may be that yours has newer firmware and has added new stuff. it looks like perhaps the ranges for bass and treble adjustments per zone have been extended or something, so the driver can't store the values. I would guess that if you look at those fields they are in error in the driver? If not, then the driver isn't actually setting the error state but probably just isn't trying to store anything at all. Do you happen to have those values cranked up high (or low) perhaps?
Dean Roddey
Explorans limites defectum
Reply
#3
I haven't ever adjusted them, but will take a look. I originally had the CT610 linked with the HD6 and it provided audio and video to 6 zones. The HD6 had a problem sending out video, so I did send the B&K HD6 in for repair, and they did update the firmware when they sent it back. The B&K CT610 (CTHD6 moniker on CQC), has not been updated. The HD6 (BKHD6 moniker on HD6) is now a separate driver. Before, when I had the HD6 and CT610 linked together as one, I never got any error messages. Will take a look and let you know.
Reply
#4
I went ahead and used the B&K software and reset the device, and now this issue seems to have cleared up. Thanks for the proper direction on it.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Event Server Error Bugman 4 256 06-05-2022, 08:54 AM
Last Post: Bugman
  Driver for Amazon 4k Stick Darrie 3 512 01-15-2022, 02:21 PM
Last Post: znelbok
  Help with Log File Error karenlee 4 672 10-28-2021, 08:17 AM
Last Post: Dean Roddey
  CQSL Interface Driver connects but no control NightLight 3 570 10-26-2021, 01:12 PM
Last Post: NightLight
  Template scaling error NishanF 1 904 11-10-2020, 03:21 PM
Last Post: NishanF
  Error Running Installer to Enable SSL gReatAutomation 2 1,116 10-26-2020, 07:41 AM
Last Post: gReatAutomation
  Error trying to edit scheduled events George M 15 2,591 09-27-2020, 09:27 AM
Last Post: George M
  ClickPLC driver now failing after upgrade znelbok 2 996 09-21-2020, 10:48 PM
Last Post: znelbok
  Pentair driver tom 5 1,984 08-02-2020, 11:29 PM
Last Post: kblagron
  Web Camera: libvlc.dll error simplextech 15 5,880 07-23-2020, 05:22 AM
Last Post: batwater

Forum Jump:


Users browsing this thread: 1 Guest(s)