Posts: 1,275
Threads: 135
Joined: Dec 2010
Hi Guys -
I need a technical question answered. I just ordered a Rain 8 Pro irrigation controller that im going to connect to cqc via a cat5 with two of these
http://www.monoprice.com/products/produc...1&format=2
<one female and one male>
however, i need to use one of the pairs in the cat5 to run a contact closure for my garage door. so my question is what pins on the rs-232 will i need to connect inorder to make this work. my understanding is that it will work.
A) is this true that it will work
B) what pins do i need to connect
Thanks
Posts: 1,858
Threads: 77
Joined: May 2007
zra Wrote:Hi Guys -
I need a technical question answered. I just ordered a Rain 8 Pro irrigation controller that im going to connect to cqc via a cat5 with two of these
http://www.monoprice.com/products/produc...1&format=2
<one female and one male>
however, i need to use one of the pairs in the cat5 to run a contact closure for my garage door. so my question is what pins on the rs-232 will i need to connect inorder to make this work. my understanding is that it will work.
A) is this true that it will work
B) what pins do i need to connect
Thanks
As I remember, the Rain8 only needs 3 wires for its RS232 connection: RxD, TxD, and Ground. Those are pins 2, 3, and 5 on the DB9 connector.
Posts: 1,275
Threads: 135
Joined: Dec 2010
Thanks JKish,
also thanks for the killer driver for the squeezebox and i saw that you created one for the rain 8 too. appreciate your contributions. excellent work.
Posts: 1,858
Threads: 77
Joined: May 2007
zra Wrote:Thanks JKish,
also thanks for the killer driver for the squeezebox and i saw that you created one for the rain 8 too. appreciate your contributions. excellent work.
Thanks, glad you like it.
Once you get the Rain8 installed, you will need to install the Rain8 driver (which I didn't write) and the Irrigation Scheduler driver if you are interested in my stuff. I should have an updated version of the Irrigation Scheduler coming soon.
Posts: 1,858
Threads: 77
Joined: May 2007
zra Wrote:Jkish or anyone else that might know the answer -
I have the thermostats now and i think i have them wired correctly except im not sure what the A+ A- B+ B- relationship should be? should i be wiring the TX to A+ and the RX to B- or B+?
Thermostats?
Posts: 1,275
Threads: 135
Joined: Dec 2010
03-31-2011, 12:54 PM
(This post was last modified: 03-31-2011, 12:57 PM by zra.)
sorry jkish im confusing myself...
im installing the thermostats not the rain8
The thermostats are RS485 and....welll i need to go back to the drawing board.
