Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help - Trying to compare to Time fields
#11
OK - I hope that was the missing link.

I also think I was using the wrong value for the variable driver timer field that I use to set the "change filter" time with. Originally I was trying to use enoch time and then divide the results by 10,000,000 to get seconds. I don't think that was giving me the desired number. So I simplied things by calculating the number of seconds there are in 300 hours (1080000) and then getting the hex value of that number (107ac0). I took out the dividing by 10,000,000 command as well.

On the actual run timer field, I still divide by 10,000,000 to get the number of seconds passed since the timer started.

Using the Greater Than or Equal command now gives a result that I would expect. The current run timer value is drastically smaller than the "Change Filter" time - which it should be at this point since the filters were only changed a couple of days ago.

So I'll call this problem solved. At least for the time being. I'll see how long it really takes for the system to tell me to actually change the filter. That shouldn't occur for at least several months.

Thanks for all the help Dean!
Brian - a long time user that rarely messes with the system now
Other systems used:
SageTV w/ cablecard tuner & multiple extenders for viewing
BlueIris and IP cameras for CCTV
Incredible PBX for home phone
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Time to replace my mSata HDD. ellisr63 4 1,407 11-23-2018, 11:47 AM
Last Post: ellisr63
  how to synchronize 2 fields lleo 3 1,613 12-01-2015, 01:56 PM
Last Post: Dean Roddey
  Return time from UPB rtarver 9 2,563 08-01-2015, 08:34 AM
Last Post: Dean Roddey
  Daylight Savings Time Deane Johnson 9 3,231 03-08-2015, 12:28 PM
Last Post: Deane Johnson
  Turning light off after certain time royalj7 8 2,229 11-04-2012, 02:35 PM
Last Post: royalj7
  run time driver potts.mike 3 1,562 02-06-2011, 06:49 PM
Last Post: Dean Roddey
  Formatting STDRtv time / date Sendero 2 1,712 01-27-2009, 12:56 AM
Last Post: Sendero
  Control fields in Main Template Trioxide 29 6,172 05-02-2008, 07:23 PM
Last Post: ellisr63
  Lights go off after set time ellisr63 3 1,639 12-16-2007, 09:05 AM
Last Post: ellisr63
  Variables and Zone Controls for driver fields jmwhooper 2 1,599 08-15-2007, 01:15 PM
Last Post: jmwhooper

Forum Jump:


Users browsing this thread: 1 Guest(s)