02-28-2010, 08:20 PM
(This post was last modified: 03-09-2010, 11:51 AM by CalypsoCowboy.)
Cleaning out some stuff in the closet, I'm sure to make room for more stuff or that's what the wife would say.
3 - RZ106-1ZX Vizia RF Z-Wave Dimmers, ~3 years old, work fine, no issues
RZCPG-SG Vizia RF Z-Wave Controller, ~3 years old, upgraded model with timer
Pending - HA22 Intermatic Z-Wave USB Controller, ~3 years old
These are the original Vizia RF dimmers with the vertical indicator lights, worked great in my house, I just didn't get enough of them before they switched over to the new Vizia RF style which I don't like.
$120 for the group, I'd prefer to sell as a group, but will split.
Nuvo Simplese - Partial setup - $250
Amplifer is used but appears to work well, I puchased it used and have connected to it via RS232 but I haven't had any speakers plugged into it. Remote, Allport cable, RS232 adapter, and NIB Allport wall port. No keypads. This would work great for someone using CQC and doesn't need the keypads.
HAI Omni II - $250
Older HA Omni II I got it used on CQC forums, he indicated he checked it out and everything was fine. It looks like it comes with 2.0 firmware. Includes keypad, recessed box, and serial cable for the board. I just never got around to installing it.
As for partial trades, I'm looking for a Sage HD200, HAI Generation 2 UPB switches, a 6 button keypad or two, a couple of lamp modules, RS232 controlable reciever (preferably Denon, Onkyo, or Integra), internal blu-ray drive, 3 Channel vision CV0508 network modules, 8 port gigabit switch, squeezebox duet, boom, radio, Mads Electronic Smarty programmer for 05 Dodge Cummins
PM me if you have any questions.
![[Image: index.php?act=attach&type=post&id=3110]](http://www.cocoontech.com/forums/index.php?act=attach&type=post&id=3110)
![[Image: index.php?act=attach&type=post&id=3111]](http://www.cocoontech.com/forums/index.php?act=attach&type=post&id=3111)
![[Image: index.php?act=attach&type=post&id=3112]](http://www.cocoontech.com/forums/index.php?act=attach&type=post&id=3112)
![[Image: index.php?act=attach&type=post&id=3113]](http://www.cocoontech.com/forums/index.php?act=attach&type=post&id=3113)
Thanks for looking
Josh
3 - RZ106-1ZX Vizia RF Z-Wave Dimmers, ~3 years old, work fine, no issues
RZCPG-SG Vizia RF Z-Wave Controller, ~3 years old, upgraded model with timer
Pending - HA22 Intermatic Z-Wave USB Controller, ~3 years old
These are the original Vizia RF dimmers with the vertical indicator lights, worked great in my house, I just didn't get enough of them before they switched over to the new Vizia RF style which I don't like.
$120 for the group, I'd prefer to sell as a group, but will split.
Nuvo Simplese - Partial setup - $250
Amplifer is used but appears to work well, I puchased it used and have connected to it via RS232 but I haven't had any speakers plugged into it. Remote, Allport cable, RS232 adapter, and NIB Allport wall port. No keypads. This would work great for someone using CQC and doesn't need the keypads.
HAI Omni II - $250
Older HA Omni II I got it used on CQC forums, he indicated he checked it out and everything was fine. It looks like it comes with 2.0 firmware. Includes keypad, recessed box, and serial cable for the board. I just never got around to installing it.
As for partial trades, I'm looking for a Sage HD200, HAI Generation 2 UPB switches, a 6 button keypad or two, a couple of lamp modules, RS232 controlable reciever (preferably Denon, Onkyo, or Integra), internal blu-ray drive, 3 Channel vision CV0508 network modules, 8 port gigabit switch, squeezebox duet, boom, radio, Mads Electronic Smarty programmer for 05 Dodge Cummins
PM me if you have any questions.
Thanks for looking
Josh