Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Zwave Switches
#1
Do all the switches on a 3 or 4 way circuit need to be a zwave switches? Would 1 zwave switch be enough?
Reply
#2
All need to be Z-Wave.
Reply
#3
There are two ways to do Three way circuits with z-wave,

The first and official way is to use a 3-way z-wave switch with a companion z-wave switch from the same brand name. I have tried using intermatic companion switches with ViziaRF 3-way switches and it does not work. You need the same brand.

The other method is using a Z-Wave Transmitter switch and any other load controlling switch. This method is slightly more expensive but you get the most for your money especially if you use something like a 4-button scene controller. I have used single button and 4-button transmitters/scene controllers and I personally think the single button controllers are the easiest to setupup and have the most support right now. You will need to setup "association" between the two switches. You can have multiple transmitter switches controlling the same load switch and you can also set it up so it controls multiple load switches. In this method the brands do not need to be the same they just need to be z-wave compliant and support the "association" feature which most if not all switches do now days.
David
Z-Wave World Magazine|Baltimore Hackerspace
"Why think outside the box when you could let the box think for you." - My take on Home Automation
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ISY-994i / ZWave / Smartthings kblagron 1 3,599 08-08-2018, 06:12 PM
Last Post: Dean Roddey
  ZWAVE Hack batwater 2 2,748 05-24-2018, 04:56 PM
Last Post: batwater
  Zwave MQTT bridge potts.mike 4 4,683 01-24-2018, 01:28 PM
Last Post: batwater
  HA switches / sensors dasler 14 9,160 05-21-2017, 09:45 AM
Last Post: Dean Roddey
  Managed L3 Switches - Ubiquiti batwater 2 2,369 11-08-2016, 06:10 AM
Last Post: batwater
  GoControl Essentials ZWave Sensor Kit - Clearance at HomeDepot jkmonroe 0 1,951 05-17-2016, 08:09 PM
Last Post: jkmonroe
  Smartthings as primary zwave controller? IVB 101 28,972 01-02-2016, 03:05 PM
Last Post: jkmonroe
  zwave operations question jkmonroe 9 5,512 12-30-2015, 08:29 AM
Last Post: zaccari
  zwave instant status jkmonroe 1 2,844 11-22-2015, 08:55 PM
Last Post: Dean Roddey
  ZWave keypad w LED's jkmonroe 4 3,010 02-19-2015, 11:13 AM
Last Post: potts.mike

Forum Jump:


Users browsing this thread: 1 Guest(s)