Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Horoscope Driver not working
I've tried several times to re-add and it stays in Wait for Connect with Lost Comm resources incrementing. This is version 2.1.1

EDIT: Turned verbose logging on...It seems that the driver does fine in scraping data until it gets to Aries....Then it craps with the attached logs:

[Image: Horoscope.jpg]

EDIT2: Removed Aries and it connected
I wouldn't be suprised. Any slight change in the HTML could probably throw it off. They probably changed the output in some way and that's breaking it.
Dean Roddey
Explorans limites defectum
mine is working fine... I am not on the latest beta but the I am on 2.1.5
tia, Ron

My HT equipment I want to control by CQC (some day hopefully)
Yamaha CX-A5100, Dune HD pro 4k, Dune HD Pro 4k plus, ISY 994i, LG 86" 4k FP, and a projector in the future
If they starting returning some new value, or accidentally were returning some incorrect value, that could have temporarily thrown off the driver for a while but then it could start working again. That's the down-side of screen scraping.
Dean Roddey
Explorans limites defectum
I have seen mine come and go. It is working now but then there are times it doesn't. I am a couple of version behind on the latest beta but will watch it before and after my upgrade to see if there is any difference.
I think this does not bode well for your future. Maybe it is better off if you didn't know...
My Home Theater/Automation Website

[THREAD=5957]BlueGlass CQC Config[/THREAD]
[THREAD=10624]Wuench's CQC Drivers[/THREAD]
I've been really busy with life in general and have not had time to play with HA. Chances are it is a change in the HTML. Lets wait to see if it totally breaks before I start changing things. It could just be temporary.
Z-Wave World Magazine|Baltimore Hackerspace
"Why think outside the box when you could let the box think for you." - My take on Home Automation

Possibly Related Threads…
Thread Author Replies Views Last Post
  MQTT Verify Configuration not working znelbok 4 464 03-17-2022, 01:07 PM
Last Post: Dean Roddey
  Trigger not Working after Move to new Server & V6.0.7 kblagron 4 477 03-02-2022, 05:35 AM
Last Post: sic0048
  Driver for Amazon 4k Stick Darrie 3 512 01-15-2022, 02:21 PM
Last Post: znelbok
  CQSL Interface Driver connects but no control NightLight 3 571 10-26-2021, 01:12 PM
Last Post: NightLight
  ClickPLC driver now failing after upgrade znelbok 2 996 09-21-2020, 10:48 PM
Last Post: znelbok
  Pentair driver tom 5 1,985 08-02-2020, 11:29 PM
Last Post: kblagron
Wink Is there a way to get somfy shades working with cqc? ghurty 2 1,140 07-17-2020, 11:13 AM
Last Post: kfly
  Marantz receiver driver (IP) dlmorgan999 6 2,086 05-15-2020, 03:32 PM
Last Post: dlmorgan999
  What is a modern multizone audio amplifier working with CQC? ghurty 5 1,674 04-28-2020, 02:22 PM
Last Post: Bugman
  Variables Driver Client gReatAutomation 4 1,675 04-25-2020, 12:46 PM
Last Post: gReatAutomation

Forum Jump:

Users browsing this thread: 1 Guest(s)