Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
WTB : Aprilair 8870 + 8061 + 8052 + 8811
#1
Turns out my RCS will not work with my heatpump setup. Looking to get a 8870 + the 8061 TT Sensor Module + a 8053 surface mount temp sensor. Anyone have any of the above that they will not be using?

Also interested in the 8811 protocol adapter if anyone has that too.
Reply
#2
They're a hot commodity. I doubt you'll find them around here. IVB mentioned that he was considering replacing his temp sensors with the VK011 board.

Russ...
Reply
#3
what is the VK board?
tia, Ron

My HT equipment I want to control by CQC (some day hopefully)
Yamaha CX-A5100, Dune HD pro 4k, Dune HD Pro 4k plus, ISY 994i, LG 86" 4k FP, and a projector in the future
Reply
#4
Sendero Wrote:Turns out my RCS will not work with my heatpump setup. Looking to get a 8870 + the 8061 TT Sensor Module + a 8053 surface mount temp sensor. Anyone have any of the above that they will not be using?

Also interested in the 8811 protocol adapter if anyone has that too.

Are you selling the RCS?
Reply
#5
Since I'm in the process of building a house, and maybe I can get the HVAC guy to use an aprilaire controller instead of his standard one....how would I know if aprilaire is compatible with my heatpump?
Reply
#6
ellisr63 Wrote:what is the VK board?

Take a look at this: VK011 Driver Temperature Sensor available for testing
Reply
#7
robertmee Wrote:Are you selling the RCS?

Yup, I will be. Its installed right now and I won't be selling it until I get the 8870 replacement installed. Interested in the RCS? Its the TR-40 unit. PM me with an offer if you're interested.
Reply
#8
Sendero, how did you confirm that the aprilair will work with your heatpump setup? What is it you need to compare or investigate in order to know that ahead of time?
Reply
#9
fwiw, i found my extra 8051 flushmount sensor if you're interested in that.
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply
#10
beelzerob Wrote:Sendero, how did you confirm that the aprilair will work with your heatpump setup? What is it you need to compare or investigate in order to know that ahead of time?


I e-mailed Aprilaire tech support and had a number of exchanges with Steve there. They've been great and responded with answers to my functional questions as well as wiring questions. Steve called out all the parts I needed as well as suggested that I have my installer call their 800 number if he has any questions at wiring time. Great support from Aprilaire.

The RCS will work with a heatpump, but will not work for a dual-fuel system. In areas where the outdoor temp gets below a certain temp (40 degrees or so) the heat pump cannot heat the house and you need an aux heat source. The RCS cannot handle this setup, but the Aprilaire can.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Aprilaire 8870 Thermostat + 8811 Protocol Adapter Sendero 1 5,691 07-01-2017, 11:16 PM
Last Post: Sendero
  Aprilaire 8870 $160! Target 11 9,296 02-12-2008, 04:55 PM
Last Post: beelzerob
  Aprilaire 8870 + serial adapter - $175 IVB 1 3,532 01-11-2007, 08:24 AM
Last Post: Bauer83

Forum Jump:


Users browsing this thread: 1 Guest(s)