Posts: 740
Threads: 34
Joined: Nov 2005
I wrote the one-way driver for the Russound ST2-XM driver a few months ago..waiting to get 2-way for it and this might possibly come with the new RNET driver...if not I'll be getting Mark to make it seperately.
Works perfect for one-way and all commands supported.
Posts: 4,225
Threads: 365
Joined: May 2005
I also have a mitsubishi XD400U DLp projector driver that has not been added to the main list yet. I wrote this a while back and because I didnt have the projector (it was at work) I could not proove it over a lengthy period. I have now had the chance to run it for a little while and it is fine. (Its currently over at the CQCUsers website)
That will be another one to add to Deans list.
Posts: 1,168
Threads: 44
Joined: Mar 2006
IVB Wrote:BTW, it's now up to 30.
I'm not sure I can define 'critical mass' but I know it when I see it!
Keith
Posts: 7,970
Threads: 554
Joined: Mar 2005
Just occurred to me - i'll put hyperlinks to the thread where you can get the driver, if anyone is interested in seeing the progress.
I may not be able to find them all - if you've written a driver and want to share it, PM me the thread that discusses it and i'll update this post.
Posts: 794
Threads: 72
Joined: Aug 2006
IVB Wrote:That's, eh, not bad, considering you just installed CQC on (Friday? 7 days ago?). That's gotta be a record.
Heh, well, the 600+ line Insteon CML driver I wrote this week was much harder to do (I'm waiting for knee surgery so I have some time on my hands) but I've got light control right now and just trying to decide the best way to get status (polling vs. monitoring) and polishing work to do. Next up, some basic SqueezeBox control probably followed by getting CallerID data from my Asterisk PBX server and then I might look at porting the XM Radio Online code I wrote for an opensource front-end to interface with CQC.
As soon as I get the power supply for the Fujitsu 3500 I'll go back to working on interfaces too. I've got guests coming in a couple of weeks, need to show them some cool things! Did someone say CQC was addictive? :-D
Posts: 1,094
Threads: 69
Joined: Mar 2006
znelbok Wrote:an xbox running XBMC (XBOX media center) has a web interface that allows control of the box remotely (as opposed to the IR remote). It will display the media accessible by the xbox without the need for the CQC repository as well as control over transport functions etc.
Is this the old XBox or the 360?
Posts: 740
Threads: 34
Joined: Nov 2005
The old Xbox bph, they are modded with a chip and XBMC(Xbox Media Center) is loaded onto them ...more info here
http://www.xboxmediacenter.com/
Posts: 7,970
Threads: 554
Joined: Mar 2005
Dean - i don't want to ask for too many stickies on this forum, but this seems like an important one so folks can see what's in progress. Could you please sticky this one? You can unsticky the lurkers one if you think 3 stickies is too many.
many thx.
Posts: 4,225
Threads: 365
Joined: May 2005
If anyone has a Mitsubishi projector and wants a driver, the existing one can be simply modified to suit as they all use basically a similar command set with only very slight differences.
Mick
Posts: 930
Threads: 23
Joined: Jan 2005
I have half written a driver for the Ultimeter II weather station that you can add to the list.
Also I'm going to start work on a driver to monitor the status of my sewage pumping system..... now that's sure to be a best seller.
I think you can leave that one off the list Vivek.
Cheers
Rohan
HAMFIELD
Software & Hardware Solutions
Makers of the
Translink C-Bus Gateway
for the Apple iPad, iPhone and iPod Touch.
