Posts: 1,210
Threads: 181
Joined: Dec 2008
Dean,
Remember a while back we had the issue of the Elk driver not updating the Counter fields. You were only doing it if the Elk software version was beyond a specific number. You fixed that by supporting versions further back. Well, you didn't carry that patch over to 5.4, so I'm having the issue again.
Ron
Posts: 40,483
Threads: 491
Joined: Aug 2002
Hmmm... OK, I'll check that. I don't think I would have removed it, but anything is possible.
Dean Roddey
Explorans limites defectum
Posts: 1,210
Threads: 181
Joined: Dec 2008
You sent me a working driver version 6/19/2019. Not sure you incorporated the changes into the official driver
Thread was "Elk Counter Update".
Posts: 40,483
Threads: 491
Joined: Aug 2002
What version did we go back to in the other version?
Dean Roddey
Explorans limites defectum
Posts: 1,210
Threads: 181
Joined: Dec 2008
Something prior to 5.2.10
Posts: 40,483
Threads: 491
Joined: Aug 2002
It looks like it's currently checking for either 5.3 or beyond, or a version of 4.x that is 4.1.11 or beyond. What version are you running currently? If it supports counters, then presumably we can take either the 5.x or 4.x version downwards to that.
Dean Roddey
Explorans limites defectum
Posts: 1,210
Threads: 181
Joined: Dec 2008
I'm running 5.2.10. So setting a lower limit of 5.2 would work.
Posts: 1,210
Threads: 181
Joined: Dec 2008
Posts: 40,483
Threads: 491
Joined: Aug 2002
The lower limit is already 5.2.0. So presumably I still do have that fix in place. Are you sure you are loading the shipped one? Right click on it in the browser tree and look the driver info and let's see what it says. Make sure it's pointing into the system are for the server side CML path.
Dean Roddey
Explorans limites defectum
Posts: 1,210
Threads: 181
Joined: Dec 2008
Any way to attach a jpg here?
