Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[REQUEST] Z-Wave Devices
#1
New Z-Wave devices to add.

Zooz ZEN15 Heavy Duty Power Plug with energy monitoring
StelPro Ki STZW402+ Thermostat

Dumps are attached


Attached Files
.zip   zwave-dumps.zip (Size: 801 bytes / Downloads: 2)
Reply
#2
What is the set point range for that guy? I notice it only supports heating set point and it doesn't provide any fan mode support, so it won't be a V2 compatible thermo. It also only supports a single device being associated. That's one of those places where using another device as a master that thinks it owns the network can be a problem. If it periodically sets itself as the associated controller, we'll stop seeing reports.
Dean Roddey
Explorans limites defectum
Reply
#3
(01-05-2020, 01:48 PM)Dean Roddey Wrote: What is the set point range for that guy? I notice it only supports heating set point and it doesn't provide any fan mode support, so it won't be a V2 compatible thermo. It also only supports a single device being associated. That's one of those places where using another device as a master that thinks it owns the network can be a problem. If it periodically sets itself as the associated controller, we'll stop seeing reports.

The StelPro t-stat is a Heat only baseboard thermostat.  No fan, no cool.

Range is 41F to 86F

Spec sheet:
http://pro.stelpro.com/contenu/us/pdf/fi...ZW402_.pdf

Correct it only supports a single association which is a problem in a master/slave setup like CQC is using.  The master controller I've setup currently is a dumb PC controller just like the Vizia controller was so it shouldn't be a problem but I still want to test and see IF it will be a problem or not.  This type of z-wave setup of a slave controller being the actual one doing the work is kinda weird actually.  It works for most devices but there are those that expect to only ever talk with the master and only have single assosciation (life line) capability.

I've been searching for years now for a t-stat for baseboard heaters and the Stelpro is the only z-wave option for baseboard 240v line volt heaters.  There are some ZigBee offerings and then there are WiFi.  

If you add ZigBee support at a very small scale narrow band I'm happy to get a t-stat and work with you on implementation Smile
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Z-Wave Device List simplextech 2 1,348 02-01-2020, 07:24 AM
Last Post: simplextech
  Z-Wave dual usb stick setup simplextech 7 2,276 01-20-2020, 01:32 PM
Last Post: simplextech
  Z-Wave Device Support simplextech 6 2,841 01-06-2020, 02:24 PM
Last Post: simplextech
  Z-Wave include fails with security simplextech 15 4,010 01-04-2020, 06:18 PM
Last Post: simplextech
  New Z-Wave driver preview Dean Roddey 162 46,031 08-02-2019, 03:06 PM
Last Post: Dean Roddey
  Zwave / Remove unused devices? gReatAutomation 2 1,168 07-25-2019, 02:27 PM
Last Post: gReatAutomation
  New z-wave Ron Haley 4 1,558 06-25-2019, 07:44 PM
Last Post: Ron Haley
  The server did not reply to the 'rset' request indygreg 3 2,403 07-26-2018, 11:22 AM
Last Post: Dean Roddey
  Changing Field Values in Devices Tab TurboSam 3 2,260 01-01-2018, 02:47 PM
Last Post: Dean Roddey
  Incorporating zWave devices kjaerligkatt 4 3,217 08-14-2017, 08:56 AM
Last Post: kjaerligkatt

Forum Jump:


Users browsing this thread: 1 Guest(s)