Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ISY994i Support
#41
(01-06-2020, 02:04 PM)Dean Roddey Wrote: IPV6 isn't an issue and should be on, not because CQC needs it (though it will use it), but because Microsoft considers it a non-optional thing these days.

Our HTTP stuff does handle chunked transfers. Though it's potentially possible they are doing something that we've never run into. But that doesn't look to be the issue from the logs. It's the ISY returning 404 errors for the services URL.
I can re-enable the IPv6 that's not a problem even though it's not in use.

yes the 404 is coming from the ISY but the RSub error 6 is happening from the remote subscription of CQC and error 6 is the tcp connection is in a TIME_WAIT from disconnect.  

Something is dropping the connection whether it's the plugin or ISY I don't know yet.  However it's with 2 ISY's running 5.x firmware and the 3rd I've tested with 4.7.3 firmware had 1 reconnect during a few hours time.  Of course the ISY with 4.7.3 had no devices and no activity which may have been why it had no problems.  I don't know.  But I can't restore my config to 4.7.3 from 5.x as they're not compatible (I tried).
Reply
#42
Dean, I noticed that Insteon IOLinc devices aren't being pulled in by the Driver either. Here's the XML for the Sensor and Relay for an IOLinc

<node flag="128" nodeDefId="BinaryControl_ADV">
<address>48 8B 99 1</address>
<name>Garage Door 1-Sensor</name>
<parent type="3">21137</parent>
<type>7.0.65.0</type>
<enabled>true</enabled>
<deviceClass>0</deviceClass>
<wattage>0</wattage>
<dcPeriod>0</dcPeriod>
<startDelay>0</startDelay>
<endDelay>0</endDelay>
<pnode>48 8B 99 1</pnode>
<ELK_ID>H15</ELK_ID>
<property id="ST" value="0" formatted="Off" uom="100" />
</node>
<node flag="0" nodeDefId="RelayLampOnly">
<address>48 8B 99 2</address>
<name>Garage Door 1-Relay</name>
<parent type="1">48 8B 99 1</parent>
<type>7.0.65.0</type>
<enabled>true</enabled>
<deviceClass>0</deviceClass>
<wattage>0</wattage>
<dcPeriod>0</dcPeriod>
<startDelay>0</startDelay>
<endDelay>0</endDelay>
<pnode>48 8B 99 1</pnode>
<ELK_ID>H16</ELK_ID>
<property id="ST" value="0" formatted="Off" uom="100" />
</node>
Reply
#43
Any chance to take a look at adding IOLinc support for the ISY Driver?

The current driver also is NOT adding any of my ISY Scenes. The docs and driver should support Scenes but it's not adding any of them. Those are kinda necessary to fully integrate an Insteon environment.
Reply
#44
Deane any chance you've looked into the missing devices and such for the ISY driver?

Missing are:

IOLinc (sensor/relay)
Insteon Remotes (buttons for triggers)
Scenes
Variables (int/state)
Programs (run then)
Reply
#45
I'm deep in fundamental changes to help with Linux platform support.
Dean Roddey
Explorans limites defectum
Reply
#46
(01-12-2020, 12:38 PM)Dean Roddey Wrote: I'm deep in fundamental changes to help with Linux platform support.

Fully understand.  Without Scenes that will make some things challenging for testing.  I'll have to work around this for now.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Additional MQTT Support znelbok 5 90 05-14-2020, 03:55 PM
Last Post: Dean Roddey
  Elk Version Support Issue Ron Haley 20 449 05-05-2020, 08:38 PM
Last Post: Shaky
  RadioRA2 Visor Control Receiver - Input support gReatAutomation 12 956 02-24-2020, 07:38 AM
Last Post: gReatAutomation
  New MQTT support Dean Roddey 65 6,898 02-02-2020, 02:00 PM
Last Post: simplextech
  ISYv2 Driver - IOLinc Support simplextech 7 760 02-01-2020, 07:18 PM
Last Post: simplextech
  Z-Wave Device Support simplextech 6 659 01-06-2020, 02:24 PM
Last Post: simplextech
  Insteon Hub Support batwater 37 9,613 09-15-2019, 01:38 PM
Last Post: Dean Roddey
  SubSonic Media Server API Support? gReatAutomation 4 831 06-16-2019, 02:45 PM
Last Post: gReatAutomation
  ISY994i ellisr63 7 1,519 05-04-2019, 07:58 PM
Last Post: kblagron
  Does the auto-gen template system support Roku? ghurty 3 1,069 12-31-2018, 06:14 PM
Last Post: Dean Roddey

Forum Jump:


Users browsing this thread: 1 Guest(s)