Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lutron RadioRA2 Driver and Lutron Visor Control
OK, give this guy a try. As always, import, then do a reconfig on the driver to pick up changes.

Attached Files
.cqcdrvpack   RA2_WithContactClosures.CQCDrvPack (Size: 39.8 KB / Downloads: 1)
Dean Roddey
Explorans limites defectum
Thanks. I'll have a look at it.
Thanks Dean. Am I supposed to use a specific option? I thought there would be a "Contact Closure" option. The options available are the same as previous:

[Image: Screen-Shot-2019-11-18-at-09-03-26.jpg]

The package imports fine:

[Image: Screen-Shot-2019-11-18-at-09-17-14.jpg]

I even deleted the driver and re-added it but Contact Closure is not in the driver info:

[Image: Screen-Shot-2019-11-18-at-09-20-12.jpg]
Oh, duh! Just sending you the driver pack won't help. The client driver was updated as well and it's a C++ driver so it can't be gotten except with a new code drop. Let me see where I stand. I have a number of changes. I need to take a look at the Dune driver, then maybe I can do a new drop.
Dean Roddey
Explorans limites defectum
Sure no problemo. Thanks.
Hey Dean, just following up on this to learn when there would be a new drop.
Not yet. Because I'm doing this Linux stuff, the changes I'm making are much more fundamental than normal. So it takes a lot more time to test for a release, which means I can't do them as quickly as normal. And I'm also trying to make sure that something someone reported is either taken care of not my fault and it's a tricky one to be sure of (also made worse by the more fundamental changes I'm making, which are that much more suspect any time something appears iffy.) Of course the irony is that then it ends up being in some code that's been around forever, but you always suspect the stuff you've been changing and spend your time trying to blame that.
Dean Roddey
Explorans limites defectum
Understood thanks for the context.
So I'm not seeing any discrepancy between the driver's reported set point values and the ones shown on the thermo, either when setting them via the thermo interface or via the driver. I've been running them up a degree at a time, which would show up any rounding issue at some point when it hit the needed magic value, and they continue to agree.

There is a five second delay or so since the thermo doesn't immediately set the new set point. It waits until it's pretty sure you aren't going to make another change. But then it sends outs the value and they seem always agree for me.
Dean Roddey
Explorans limites defectum
Updated thread:

Possibly Related Threads…
Thread Author Replies Views Last Post
  Driver for Amazon 4k Stick Darrie 3 590 01-15-2022, 02:21 PM
Last Post: znelbok
  CQSL Interface Driver connects but no control NightLight 3 652 10-26-2021, 01:12 PM
Last Post: NightLight
  920 Beta Bug - Lutron Thermostat gReatAutomation 5 1,046 02-12-2021, 06:13 AM
Last Post: gReatAutomation
  Was the issue with Lutron Radio RA2 not updating ever fixed? ghurty 3 1,210 12-06-2020, 11:42 AM
Last Post: gReatAutomation
  Lutron Caseta Add Fan and Shade Controllers bryanb 1 929 11-29-2020, 10:16 AM
Last Post: Dean Roddey
  ClickPLC driver now failing after upgrade znelbok 2 1,033 09-21-2020, 10:48 PM
Last Post: znelbok
  IR Control LesAuber 1 863 08-03-2020, 07:40 PM
Last Post: LesAuber
  Pentair driver tom 5 2,035 08-02-2020, 11:29 PM
Last Post: kblagron
  Marantz receiver driver (IP) dlmorgan999 6 2,137 05-15-2020, 03:32 PM
Last Post: dlmorgan999
  Lutron Caseta Occupancy Sensor bryanb 14 4,098 04-26-2020, 08:59 AM
Last Post: bryanb

Forum Jump:

Users browsing this thread: 1 Guest(s)