Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Insteon V2 Driver Question
#1
After reading another post about the Bond Fan control, I decided to see if Insteon had added any better options for fan support - unfortunately they haven't.  I decided to delve into a Z-Wave Fan Control switch since my ISY-994i supports Z-wave.  I purchased a GE Z-Wave Fan Control Switch and installed.  It was easy to set up with the Insteon Admin Console, and can be controlled without issue there.  Best part was it was only $46, and fits where the previous fan control switch was.

I am still on the Insteon V1 driver, and the fan shows up there but with a few issues - once it is on, it can be controlled (Off/Dimmer Status) without issue.  However, if you turn it off and try to turn it back on, it rejects the request.  You can turn it on through the Insteon Admin Console and then control it again through the driver.  

I could dig through the CML code and try to figure it out, but thought I would look at the V2 supported driver since the Insteon V1 it is old and Wuench apparently has moved on.  However the fan doesn't show up there like it does in V1.  Any thoughts on why it shows up in the Insteon Admin Console, and in V1, but does not show up in V2.  In the V1 driver, it shows up like a Dimmer switch (_Status to control percentage, and _Switch to control off/on).
Reply


Messages In This Thread
Insteon V2 Driver Question - by kblagron - 08-01-2019, 09:31 AM
RE: Insteon V2 Driver Question - by kblagron - 08-01-2019, 10:51 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  SSL Certificate Question gReatAutomation 1 518 10-26-2020, 07:48 AM
Last Post: gReatAutomation
  ClickPLC driver now failing after upgrade znelbok 2 460 09-21-2020, 10:48 PM
Last Post: znelbok
  Pentair driver tom 5 1,130 08-02-2020, 11:29 PM
Last Post: kblagron
  Marantz receiver driver (IP) dlmorgan999 6 1,128 05-15-2020, 03:32 PM
Last Post: dlmorgan999
  V2 Question - OpenWeatherMap Using their New JSON Data Feed kblagron 7 1,333 05-07-2020, 01:40 PM
Last Post: Dean Roddey
  Variables Driver Client gReatAutomation 4 901 04-25-2020, 12:46 PM
Last Post: gReatAutomation
  Dynamic Overlay Question bryanb 4 766 04-17-2020, 03:48 AM
Last Post: bryanb
  Reconfig of Driver Causes Built In Triggers to Fire gReatAutomation 2 698 03-25-2020, 04:09 PM
Last Post: gReatAutomation
  Lutron RadioRA2 Driver and Lutron Visor Control gReatAutomation 29 8,137 03-19-2020, 01:03 PM
Last Post: gReatAutomation
  Timers Driver / Field Time Image / Seconds gReatAutomation 1 664 03-16-2020, 05:48 PM
Last Post: Dean Roddey

Forum Jump:


Users browsing this thread: 1 Guest(s)