Leak Gopher Control Valve - NoAutoMatch

[gReatAutomation]

Leak Gopher Control Valve - NoAutoMatch.



Another handy device as I currently use it to turn on/off water to water heater (when leak is detected) and another to turn on/off water main either when leak is detected or when traveling.

Technical documents below:

https://www.leakintel.com/WD230AWP/WD230...rt&Guest=1

[Dean Roddey]

OK, it looks like it is pretty simple. It sends basic command class commands to report status and accepts basic or binary switch commands for control. I should be able to do that via eye easily enough.

[gReatAutomation]

Sounds good thanks.

[gReatAutomation]

Attached is the trace for this unit and below is unit information.

Code:

Name: Unit_D
Id: 13
Listener: True
Freq Listener: False
Man Ids: 173 3 2

Classes: 
    ZWPlusInfo (2)
    Version (2)
    ManSpec (2)
    Association (2)
    AssocGrpInfo (1)
    PowerLev (1)
    BinSwitch (1)
    Basic (1)
    Notification (4)

[Dean Roddey]

That one is already in the latest beta. It's just done by eye, so try it and see if it works.

[gReatAutomation]

That one is already in the latest beta. It's just done by eye, so try it and see if it works.

Thanks, I'll try it out.