Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HAI Driver Issue
I upgraded to 5.2.11 and my HAI driver is not working.
The Driver Status is: Wait to Connect

I know the IP is working on the HAI panel because I can see and control it form my phone app just fine.

I have an old V1 driver that connects fine.

I tried to reconfig the driver
I also tried to delete and start from Joy

I got it going.

I had a couple of zones that were bypassed.
I brought them back online and then reconfig the driver and it connected.

Hopefully that fixed it for good!
Hmm.... Maybe there's something about bypassed zones that is confusing it. I'll put that on the list to look at.
Dean Roddey
Explorans limites defectum
Could you flush the logs, then bypass a zone and see if that makes it go off line? If so, put the driver into high verbosity, let it run for ten or fifteen seconds, then turn verbose logging off and get me a log dump?
Dean Roddey
Explorans limites defectum
As a data point, I ran into the same issue recently and it was a bypassed zone. I meant to post but forgot.
OK, I'll be taking a look at that in the next day or so.
Dean Roddey
Explorans limites defectum
OK, I've got that fixed for the next drop. Actually this error was introduced a long time ago but not caught because it was using the wrong enumeration to text translation, but both them returned the same value for the first two values (Disarmed and Armed.) They only returned different values for the bypassed modes. So it wouldn't fail until you bypassed one.
Dean Roddey
Explorans limites defectum

Possibly Related Threads…
Thread Author Replies Views Last Post
  RFXcom driver or Tellstick driver kernal69 8 2,928 01-25-2020, 03:06 PM
Last Post: simplextech
  Dune driver wait for config error ellisr63 44 10,033 11-28-2019, 06:35 PM
Last Post: ellisr63
  TTS II Driver requirements znelbok 1 961 05-20-2019, 09:34 PM
Last Post: Dean Roddey
  CQC to PowerView Hub via Serial Driver Deane Johnson 18 7,186 05-14-2018, 01:11 PM
Last Post: Deane Johnson
  Monoprice 8x8 HDMI matrix Driver NightLight 13 9,071 09-04-2017, 09:45 AM
Last Post: Dean Roddey
  ELK V2 Driver - AreaArm field & Triggers? sic0048 4 3,554 08-19-2017, 04:46 PM
Last Post: Dean Roddey
  UPB Driver Issue tcmcgec 6 5,284 01-27-2017, 07:18 PM
Last Post: Dean Roddey
  HAI OmniProII Driver problems MBurger 4 4,055 12-24-2016, 07:59 AM
Last Post: Dean Roddey
  Onkyo NR646 and Universal Integra Driver? Sendero 6 4,644 10-31-2016, 11:22 PM
Last Post: Sendero
  Train HTTP Trigger Driver jkmonroe 24 13,668 10-25-2016, 11:55 AM
Last Post: karenlee

Forum Jump:

Users browsing this thread: 1 Guest(s)