Posts: 282
Threads: 25
Joined: Sep 2010
This unit seems to get good reviews. Supports RS232.. Has anyone controlled it from CQC. What are the chances the current Monoprice driver would do it?
Thoughts? The price is right and I need an 8x8. 
Blackbird 4K 8x8 HDMI Matrix
Model #15748
https://www.monoprice.com/product?p_id=15748
Posts: 40,483
Threads: 491
Joined: Aug 2002
I don't see any protocol doc there on that page. Any idea where it is?
Dean Roddey
Explorans limites defectum
Posts: 282
Threads: 25
Joined: Sep 2010
A little more digging and I find that it's a rebrand of this unit by Lindy
8x8 HDMI Matrix 4K60Hz With IR Remote Control
Part No. 38153
https://www.lindy.co.uk/audio-video-c2/m...trol-p9825
This is the protocol spec for the unit. Confirming with Monoprice via email. 
https://www.lindy.co.uk/downloads/148646...Matrix.pdf
Posts: 40,483
Threads: 491
Joined: Aug 2002
That protocol isn't really related to to one for the other Monoprice matrix driver we currently have (5704.) So if that's it it's a completely different sort of thing, though the protocol looks to be very limited so it couldn't be too hard I guess.
Dean Roddey
Explorans limites defectum
Posts: 282
Threads: 25
Joined: Sep 2010
Ill order the switch and see if it does the switching part first. Then maybe we could write a driver?
Posts: 40,483
Threads: 491
Joined: Aug 2002
It looks like all it provides for is just a single command to make the input to output connections. That could be done via a simple PDL driver most likely. It would be write only. Well there's a power off/on as well, also write only, but it's probably not something you'd be turning off, right?
Dean Roddey
Explorans limites defectum
Posts: 282
Threads: 25
Joined: Sep 2010
No I wouldn't need to turn it off.
Posts: 2,339
Threads: 104
Joined: Apr 2009
09-03-2017, 05:31 AM
(This post was last modified: 09-03-2017, 05:53 AM by batwater.)
So this might be different than the Blackbird 4x4 I requested
here 2 weeks or so back, there is also an 8x8 version that is $300 less expensive that does not have the indivdual IR ports, everything else looks the same.  That is other than the fact that the control language is much more straight forward and flexible.
I have my unit installed and on the network.  I can also add a serial port connection if that would make it easier.  Dean, this might be a good side bar distraction for a few days on the zwave stuff...  
Here is the
user manual
Let me know if you want me to set up access.
-Ben
Posts: 40,483
Threads: 491
Joined: Aug 2002
I'm getting a new drop up. Once that's done I'll re-read the docs. Go ahead and port forward it and I'll take a whack at it.
Dean Roddey
Explorans limites defectum
Posts: 2,339
Threads: 104
Joined: Apr 2009
Cool, done! Email sent with details.
Thanks Dean!!!
-Ben