Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Multiple IV clients on the same machine
#1
I am now using my CQC server for two displays. One directly connected to the server the other using an RDP session. Both using IV. The problem is I am also using IV control driver to do various things with one client and don't want those commands to be issued to the other. As far as I can tell there is no way to differentiate the two. 

In reality I just need to block the commands to one IV client. Is there a cmd line switch I can use?
Reply
#2
I believe there is a command line switch to set the control port on the IV and then you would load a separate IV driver instance for each one to talk to them individually.

Unfortunately my searches aren't turning up anything.
Wuench
My Home Theater/Automation Website

[THREAD=5957]BlueGlass CQC Config[/THREAD]
[THREAD=10624]Wuench's CQC Drivers[/THREAD]
Reply
#3
I couldn't find anything either and it's not /Port=XXXXX
Reply
#4
If you remove the /Port=xxx command line option from one of them, then it should not try to open its control interface anymore. That would let the other one get it and be the only one on that host. But, that means you can't start them both from the same start menu item, since they are both either going to have it or not have it. You'd have to make a copy and remove it from one if them, and use that for the one that you don't need to remotely control.

If it has a /Binding parameter, then remove that as well.
Dean Roddey
Explorans limites defectum
Reply
#5
Yup, problem solved. I removed the /Port=XXXXX from the command line used to launch one of clients and it no longer connects to the driver.

Thanks Dean!
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  TTS and remote clients or speakers simplextech 10 724 02-01-2020, 07:58 PM
Last Post: simplextech
  CQC server machine died. Trying to restore installation. AceCannon 1 1,806 04-29-2017, 11:15 AM
Last Post: Dean Roddey
  Macro to run multiple lights off/on rtarver 5 1,783 09-30-2012, 08:26 PM
Last Post: anogee
  multiple RDP sessions on one server? rm1759 8 4,344 08-15-2011, 06:26 PM
Last Post: LesAuber
  Recommendations for standalone interface clients dman000000 14 4,510 11-20-2010, 07:47 AM
Last Post: kayemsi
  CQC Master Server On Dedicated 7MC Machine? MikeW 6 2,602 08-25-2010, 11:23 AM
Last Post: wuench
  Anyone running CQC on a virtual machine? sic0048 2 1,505 02-01-2010, 02:29 PM
Last Post: znelbok
  Which Machine to Install the Server On? Sacedog 5 1,900 01-23-2009, 02:51 PM
Last Post: sic0048
  Can CQC run in a virtual machine? DaveAlvarado 1 1,630 06-23-2008, 12:45 PM
Last Post: Target
  Multiple Source Video Selection klindy 0 1,036 03-03-2008, 07:38 PM
Last Post: klindy

Forum Jump:


Users browsing this thread: 1 Guest(s)