Marantz SR5005 driver

[Dean Roddey]

Here is a second cut at the SR5005 driver. If you used the first one, then the source names have changed. Sorry about that, but we are still sort of working through some of the hairier aspects of driver standardization here. They have names that are reflective of their actual device specific names, so they should be obvious. You'll have to change your use of the previous SourceXX type source names after you install this one.

Volume is still a percentage, as all of them will be in the new world, not in dB. The previous issue with sending a 0 volume via the driver knocking it offline is fixed.

One more, non-device class, field was added as well for controlling HDMI passthrough/encode. Since it is not a device class field it doesn't have the Proc_ prefix on the field name.

It seems quite fast and responsive, but I've not used it in anger while the device is possibly off in la-la land trying to do some HDMI connection or some such thing. So keep an eye on the logs and losses of connection and such and let me know what you see.

The version attached is 1.3, which will be in the 3.4.22 CQC beta. It deals with an issue related to the setting of the zone one and two volume values, which had a glitch in the first couple versions, and also dealing with the fact that zone two only responds to command when it is powered on, so it now powers on Z2 if you send it any commands for Z2 when Z2 is powered off.