09-21-2020, 10:48 PM
From memory the first two
The message is going to the correct address but the returning message is from address 0.
Not saying its CQC, but my initial suspicion is CQC is pulling the wrong data from the replies coming back.
As quick test this morning, I powered down the PLC and the driver picked up and ran fine. So the issue could be with the PLC - something I find harder to believe but not impossible. More testing tonight.
The message is going to the correct address but the returning message is from address 0.
Not saying its CQC, but my initial suspicion is CQC is pulling the wrong data from the replies coming back.
As quick test this morning, I powered down the PLC and the driver picked up and ran fine. So the issue could be with the PLC - something I find harder to believe but not impossible. More testing tonight.
Mykel Koblenz
Illawarra Smart Home
Illawarra Smart Home