Charmed Quark Systems, Ltd. - Support Forums and Community
RFXcom driver or Tellstick driver - Printable Version

+- Charmed Quark Systems, Ltd. - Support Forums and Community (https://www.charmedquark.com/vb_forums)
+-- Forum: General Discussion (https://www.charmedquark.com/vb_forums/forumdisplay.php?fid=3)
+--- Forum: Installation/Configuration (https://www.charmedquark.com/vb_forums/forumdisplay.php?fid=10)
+--- Thread: RFXcom driver or Tellstick driver (/showthread.php?tid=8193)



RFXcom driver or Tellstick driver - kernal69 - 03-06-2013

Hi

Does a driver for "RfXcom" or "Telldus" exists ?
I want to use it to control devices from "Nexa".

Best regards.


RFXcom driver or Tellstick driver - Dean Roddey - 03-06-2013

Never heard of either of those things, so pretty sure the answer would be no. What are they?


RFXcom driver or Tellstick driver - kernal69 - 03-07-2013

Hi

Here is a link to read more about rfxcom.
http://www.rfxcom.com/

And here is telldus.
http://www.telldus.com/

They are to used to control devices through wireless comunication.


RFXcom driver or Tellstick driver - wuench - 03-07-2013

They are generic wireless control devices supporting several wireless protocols. I ran across them when researching weather stations, they can support a lot of wireless weather station protocols which is another option over using your weather console to attach via serial to a PC.

If there is an xPL driver that might be a way to interface, I think they support xPL...


RE: RFXcom driver or Tellstick driver - simplextech - 01-18-2020

Was anything ever done with the RFXCom? This is a very handy 433Mhz bi-directional unit for LOTS of things out there ranging from weather stations as mentioned to environmental sensors (temp/humidity/etc) and door/window and even motion sensors. Lots of RF devices even Ceiling fans and automated blinds/curtains.


RE: RFXcom driver or Tellstick driver - Dean Roddey - 01-19-2020

No, nothing ever came of that.


RE: RFXcom driver or Tellstick driver - simplextech - 01-19-2020

(01-19-2020, 06:51 AM)Dean Roddey Wrote: No, nothing ever came of that.

Down the road after Linux and things settle it would be nice to look into this.


RE: RFXcom driver or Tellstick driver - Shaky - 01-25-2020

I have an RFXCOM at the moment and would be interested in a driver perhaps too. I use it for RF blind motors right now via the generic serial driver - 1 way comms only. Seems it can interface to a lot of devices.


RE: RFXcom driver or Tellstick driver - simplextech - 01-25-2020

Yeah I have a RFXcom in a box. I bought it to work on but I've never opened it. I'm thinking I want to try out some 433Mhz door sensors. This isn't for security use at all it's just for automation use so not a security concern around 433Mhz.