Charmed Quark Systems, Ltd. - Support Forums and Community
Sage Media Server driver (beta) - Printable Version

+- Charmed Quark Systems, Ltd. - Support Forums and Community (https://www.charmedquark.com/vb_forums)
+-- Forum: General Discussion (https://www.charmedquark.com/vb_forums/forumdisplay.php?fid=3)
+--- Forum: Driver Development (https://www.charmedquark.com/vb_forums/forumdisplay.php?fid=13)
+--- Thread: Sage Media Server driver (beta) (/showthread.php?tid=5497)



Sage Media Server driver (beta) - Fonceur - 09-02-2010

Helheim Wrote:Yes, that's where I noticed it wasn't showing all the channels in the "List of Channels" section. If I change the SelectedLineupIndex value I can get the list for each source separately.
I thought you could do that from the template, but maybe not... Wink


Sage Media Server driver (beta) - SamVimes2 - 09-02-2010

Here's some relevant bits from the CQC log:
Code:
09/02 22:18:21-odin, CQCServer, CQCDrv_SageMediaServer_Thread31
{
    CQCKit, MEng.System.CQC.Runtime.CQCLogger.484, Status/App Status
    Exception_.DisplayText.1107 for RSL : Can't convert '5E18' to a MEng.Card4 binary form
}
09/02 22:18:21-odin, CQCServer, CQCDrv_SageMediaServer_Thread31
{
    CQCKit, MEng.System.CQC.Runtime.CQCLogger.484, Status/App Status
    Exception_.UpdateBag.1107 for RSL : Can't convert '5E18' to a MEng.Card4 binary form
}
09/02 22:18:21-odin, CQCServer, CQCDrv_SageMediaServer_Thread31
{
    CQCKit, MEng.System.CQC.Runtime.CQCLogger.484, Status/App Status
    Exception_.WaitForMessage.1107 for Any : Can't convert '5E18' to a MEng.Card4 binary form
}
09/02 22:18:21-odin, CQCServer, CQCDrv_SageMediaServer_Thread31
{
    CQCKit, MEng.System.CQC.Runtime.CQCLogger.484, Status/App Status
    Exception_.Poll.1720: Connection Error
}



Sage Media Server driver (beta) - Fonceur - 09-02-2010

SamVimes2 Wrote:Here's some relevant bits from the CQC log:
Thanks, I do see why that would be bad... So I should be able to locate it.


Sage Media Server driver (beta) - Fonceur - 09-02-2010

SamVimes2 Wrote:RSL : Can't convert '5E18' to a MEng.Card4 binary form
Could you post the sagetv_0.txt that goes with it please. I am getting the feeling that the EPGID isn't using the normal format... Did you use some metadata scrapper that also overwrote values in your recordings?


Sage Media Server driver (beta) - SamVimes2 - 09-03-2010

Hmmm...not that I know of. I have been using BMT/Phoenix for awhile but they coexisted happily before my round of upgrades.

I *DID* install and configure SageMyMovies. Do you think that has an affect?

Searching for 5e18 in the log, I found this:
Code:
Thu 9/2 22:17:40.281 [Thread-65@492750] [[SageTCPServer-MessageType]]: Found match with RSL
Thu 9/2 22:17:40.281 [Thread-65@492750] [[SageTCPServer-SageServer(local:9250)]]: Message received: RSL
Thu 9/2 22:17:40.281 [Thread-65@492750] [[SageTCPServer-SageServer(local:9250)]]: Now 1 incoming message(s) in list.
Thu 9/2 22:17:40.281 [Thread-65@492750] [[SageTCPServer-SageServer(local:9250)]]: (Processing messages) There is now 1 incoming message.
Thu 9/2 22:17:40.282 [Thread-65@492750] [[SageTCPServer-SageServer(local:9250)]]: The following UI context are available:
Thu 9/2 22:17:40.282 [Thread-65@492750] [[SageTCPServer-SageServer(local:9250)]]: (Processing messages) RSL
Thu 9/2 22:17:40.282 [Thread-65@492750] [[SageTCPServer-SageServer(local:9250)]]: Finding all the listings for: IsTVFile
Thu 9/2 22:17:40.284 [Thread-65@492750] [[SageTCPServer-SageServer(local:9250)]]: 123 files found.
Thu 9/2 22:17:40.285 [Thread-65@492750] [[SageTCPServer-SageServer(local:9250)]]: Done filling toDelete...
Thu 9/2 22:17:40.290 [Thread-65@492750] [[SageTCPServer-SageServer(local:9250)]]: There are 2 messages to be sent.
Thu 9/2 22:17:40.431 [Thread-65@492750] [[SageTCPServer-SageServer(local:9250)]]: Sending data: RSL:<?xml version="1.0" encoding="utf-8"?><Collection><List Name="IsTVFile">
<snip>
<FileName>\\saga\videos\sagetv\HowIMetYourMother-SayCheese-121748-0.mpg</FileName><EPGID>EPmt75760S05E18</EPGID>

That EPGID does not look normal...


Sage Media Server driver (beta) - Fonceur - 09-03-2010

SamVimes2 Wrote:<EPGID>EPmt75760S05E18</EPGID>

That EPGID does not look normal...
Yeah that's definitely not a valid one, and the "mt" in there makes me think that BMT did it. I asked in the forum to make sure.

Can you check for episode number smaller than 10, to see if they get padded to 5E03 or use 5E3.


Sage Media Server driver (beta) - Fonceur - 09-03-2010

The first post contains a new Media driver and SageTCPServer, to work with the "non standard" EPGID created by BMT...


Sage Media Server driver (beta) - SamVimes2 - 09-03-2010

Installed new SageTCPServer and CQC driver and updated Sage to 7.0.16. I am still seeing errors in the CQC log:
Code:
09/03 18:05:58-odin, CQCServer, CQCDrv_SageMediaServer_Thread32
{
    CQCKit, MEng.System.CQC.Runtime.CQCLogger.484, Status/App Status
    Exception_.DetailsFromBag.1338 for 07/30  08:00PM
07/29  10:00PM
07/29  08:30PM
07/28  09:00PM
07/27  11:00PM
07/26  10:30PM
07/26  07:36PM
: Can't convert '5E18' to a MEng.Card4 binary form
}



Sage Media Server driver (beta) - Fonceur - 09-03-2010

My bad, I missed one substitution, try 1.1.0.


Sage Media Server driver (beta) - SamVimes2 - 09-04-2010

That one fixed the issue, thanks.

However, touching back on something you mentioned before - the various lists (RecordedShows* for example) have funky order, like:

11,10,9,8,5,4,3,2,1,15,14,13,12,7,6.