Charmed Quark Systems, Ltd. - Support Forums and Community

Full Version: zwave device configuration
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4 5 6 7 8
after reading the zwave thread over on CT, i gave it another go for funsies. blew away the network and removed all modules from the VRUSB and RFIT, then readded them all using the Z-Stick, and using domoticz managed to replicate to the VRC0P.

believe it or not, everything seems to be working except i have an extra field for the motion sensor for #TEMP.

the motion is from a GoControl kit, a rebranded Linear, but I am using the Monoprice 10796 config in the driver and the #TEMP never works. is there a way to get rid of the temperature bit of that motion sensor? if not, can we get the actual device added into the driver?
What's the exact model of the device?
on the back of the device -

Model: WAPIRZ-1
The Z-Wave Alliance product info web site thingie has not been responding for the last couple days, so I've not managed to look it up yet.
Still not working. It's always been flaky, but now it now it won't load at all, in Chrome or IE.
There's a bit of info in their 'user manual'. Can you enable the trace file, and then breath on it or something to change the temp so that it will send out a temp report so that we can look at it?

Write "EnableTrace Yes" to the InvokeCmd field to enable the file. Then go get intimate with it, then EnableTrace No to turn off the tracing. Then post the file at CQCData\Server\Data\ZWaveLevi2\Trace.Txt and post it.
here is the trace. two things of note - my multisensor is not working anymore, just red in the browser and i dont see any response with the trace. but it does seem to work since the little red light blinks when it detects motion. not sure what's going on there. and the motion sensor that started this post is node 5.

nodes 4,6,7 are contact closures that are working perfectly.

please don't jinx my system - it has literally taken a year to get these 3 guys to work as expected. :-D

Code:
Z-Wave V2 Trace
  Version: 1.0,  Moniker: jk_sensors,  Time: 8:58:32 PM
----------------------------------------------------

New ZWMsg  8:58:38 PM
  Raw Text=005:032,001,255
  Type=Gen Report,  Node=5,  InstId=0,  Secure=No,  Bytes=3,  CmdClass=32/0x20,  Cmd=1/0x1
New ZWMsg  8:58:38 PM
  Raw Text=005:113,005,007,255,000,255,007,002,000,000
  Type=Gen Report,  Node=5,  InstId=0,  Secure=No,  Bytes=10,  CmdClass=113/0x71,  Cmd=5/0x5
New ZWMsg  9:00:07 PM
  Raw Text=005:049,005,001,009,071
  Type=Gen Report,  Node=5,  InstId=0,  Secure=No,  Bytes=5,  CmdClass=49/0x31,  Cmd=5/0x5
    Type=1,    Precision=0,    Scale=1,    Size=1
New ZWMsg  9:00:18 PM
  Raw Text=007:032,001,255
  Type=Gen Report,  Node=7,  InstId=0,  Secure=No,  Bytes=3,  CmdClass=32/0x20,  Cmd=1/0x1
New ZWMsg  9:00:18 PM
  Raw Text=007:128,003,082,000
  Type=Gen Report,  Node=7,  InstId=0,  Secure=No,  Bytes=4,  CmdClass=128/0x80,  Cmd=3/0x3
New ZWMsg  9:00:19 PM
  Raw Text=007:032,001,000
  Type=Gen Report,  Node=7,  InstId=0,  Secure=No,  Bytes=3,  CmdClass=32/0x20,  Cmd=1/0x1
New ZWMsg  9:00:19 PM
  Raw Text=007:128,003,081,000
  Type=Gen Report,  Node=7,  InstId=0,  Secure=No,  Bytes=4,  CmdClass=128/0x80,  Cmd=3/0x3
New ZWMsg  9:00:21 PM
  Raw Text=004:032,001,255
  Type=Gen Report,  Node=4,  InstId=0,  Secure=No,  Bytes=3,  CmdClass=32/0x20,  Cmd=1/0x1
New ZWMsg  9:00:21 PM
  Raw Text=004:113,005,007,255,000,255,007,002,000,000
  Type=Gen Report,  Node=4,  InstId=0,  Secure=No,  Bytes=10,  CmdClass=113/0x71,  Cmd=5/0x5
New ZWMsg  9:00:21 PM
  Raw Text=004:032,001,000
  Type=Gen Report,  Node=4,  InstId=0,  Secure=No,  Bytes=3,  CmdClass=32/0x20,  Cmd=1/0x1
New ZWMsg  9:00:21 PM
  Raw Text=004:113,005,007,000,000,255,007,002,000,000
  Type=Gen Report,  Node=4,  InstId=0,  Secure=No,  Bytes=10,  CmdClass=113/0x71,  Cmd=5/0x5
New ZWMsg  9:00:23 PM
  Raw Text=006:032,001,255
  Type=Gen Report,  Node=6,  InstId=0,  Secure=No,  Bytes=3,  CmdClass=32/0x20,  Cmd=1/0x1
New ZWMsg  9:00:23 PM
  Raw Text=006:113,005,007,255,000,255,007,002,000,000
  Type=Gen Report,  Node=6,  InstId=0,  Secure=No,  Bytes=10,  CmdClass=113/0x71,  Cmd=5/0x5
New ZWMsg  9:00:24 PM
  Raw Text=006:032,001,000
  Type=Gen Report,  Node=6,  InstId=0,  Secure=No,  Bytes=3,  CmdClass=32/0x20,  Cmd=1/0x1
New ZWMsg  9:00:24 PM
  Raw Text=006:113,005,007,000,000,255,007,002,000,000
  Type=Gen Report,  Node=6,  InstId=0,  Secure=No,  Bytes=10,  CmdClass=113/0x71,  Cmd=5/0x5
On the sensor, it looks normal enough. It's sending multi-level sensor notifications. I'll set up a new device info file for it for 4.8.1, which will probably happen pretty soon.
cool deal. i learned some patience over the past week and got the VRUSB working with these basic sensors. im sort of excited about this ...
when you have a second, can you explain the difference between this model and the Monoprice 10796 that you already support? im curious because everything ive read online says that they are the same exact model, rebranded from Linear.
Pages: 1 2 3 4 5 6 7 8