Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Honeywell TH8320ZW Thermostat - NoAutoMatch
#1
Hello again  Big Grin

Tried adding my Honeywell TH8320ZW Thermostat and received the NoAutoMatch again. Attached is the CQCZWDump file.


.txt   Honeywell_TH8320ZW.CQCZWDump.txt (Size: 307 bytes / Downloads: 2)
Reply
#2
That one will likely require some exploration. Use the manual association dialog (in the down arrow menu) to put the Aeotec's unit id into group 1 of the thermostat so that we can start looking at what kind of messages it's sending out.
Dean Roddey
Explorans limites defectum
Reply
#3
No "Manual Associations" option on the ThisDriver (Aeotec).


[Image: Screen-Shot-2019-05-22-at-21-12-01.jpg]
Reply
#4
The other way around. You want to be adding it to the thermo.
Dean Roddey
Explorans limites defectum
Reply
#5
Unfortunately that guy is too old to support the ability for CQC to ask it what modes and states it supports, so that info isn't in the dump. So we'll have to figure that out somehow.
Dean Roddey
Explorans limites defectum
Reply
#6
(05-22-2019, 06:56 PM)Dean Roddey Wrote: Unfortunately that guy is too old to support the ability for CQC to ask it what modes and states it supports, so that info isn't in the dump. So we'll have to figure that out somehow.

Interesting as it's only a couple years old and works with Home Assistant, SmartThings, Home Seer, openHab, and Domoticz.
Reply
#7
(05-22-2019, 06:18 PM)Dean Roddey Wrote: The other way around. You want to be adding it to the thermo.

No option for that:

[Image: Screen-Shot-2019-05-23-at-10-47-57.jpg]
Reply
#8
(05-23-2019, 06:40 AM)gReatAutomation Wrote:
(05-22-2019, 06:56 PM)Dean Roddey Wrote: Unfortunately that guy is too old to support the ability for CQC to ask it what modes and states it supports, so that info isn't in the dump. So we'll have to figure that out somehow.

Interesting as it's only a couple years old and works with Home Assistant, SmartThings, Home Seer, openHab, and Domoticz.

It'll work. It's just that newer ones allow you to query the information directly from the unit, and it will be in the dump. That makes it very easy to know what modes it supports. Otherwise, you have to go digging around for it and often that information isn't so immediately forthcoming.
Dean Roddey
Explorans limites defectum
Reply
#9
Hmmm... As long as it reports supporting associations that should be available. The dump you sent me includes associations, so not sure why it wouldn't be available. Do you have any other units that support associations? If so, see if it's disabled on those as well.
Dean Roddey
Explorans limites defectum
Reply
#10
I thought maybe it was a because it hadn't been matched, but I just forced the driver to make it think one of the units wasn't auto-matched, and I still get the right options.
Dean Roddey
Explorans limites defectum
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  MIMOlite Module - NoAutoMatch gReatAutomation 12 246 Today, 03:39 AM
Last Post: gReatAutomation
  Leak Gopher Control Valve - NoAutoMatch gReatAutomation 5 175 06-12-2019, 05:09 PM
Last Post: gReatAutomation
  Leviton DZR15-1RZ Receptacle - NoAutoMatch gReatAutomation 11 367 05-23-2019, 09:42 AM
Last Post: gReatAutomation
  Alarm Decoder for Ademco Honeywell Vista 20P gReatAutomation 4 196 05-22-2019, 07:26 AM
Last Post: gReatAutomation
  Is there a Thermostat that CQC can have two way schedule communication? ghurty 6 570 01-03-2019, 07:11 PM
Last Post: kblagron
  Is there a driver out there for the Honeywell Wi-Fi Smart Thermostat? ghurty 18 6,785 12-21-2017, 06:29 PM
Last Post: Dean Roddey
  Venstar Thermostat keeps disconnecting then reconnecting adamalli 7 2,889 12-03-2017, 12:03 PM
Last Post: Dean Roddey
  RCS Thermostat Driver help sic0048 10 3,844 08-19-2017, 08:01 AM
Last Post: Dean Roddey
  Honeywell Wi-Fi 9000 thermostats - Anyone else use? kfly 0 906 08-12-2017, 04:22 PM
Last Post: kfly
  Support for Honeywell Ademco Vista agarden 14 5,945 07-06-2017, 07:13 PM
Last Post: agarden

Forum Jump:


Users browsing this thread: 1 Guest(s)