Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
new build
#1
Hi Guys

Looking for any and all advice. I've had CQC for 10 years and still use it every day, although haven't really touched it for 3 or 4 years.

I'm now doing a new build house completely from scratch.

I've been looking at all the new platforms out there and looks like CQC is still relevant in the market in that it gives you developer control of your interface, as well as the ability to control virtually anything given the ability to write drivers. Not to mention the events and logic control.

I want to control 

lighting
hvac
security
gates
pool/spa
various relays for other things
I do av with apple tv and cameras with another app.

What's your suggestions for the perfect setup? Especially with regard to lighting. budget not an issue.

thanks!

Charles
Reply
#2
For lighting, unless you have the depth of pocket to afford a wired system, Lutron's Radio RA2 is pretty much the standard option for serious systems. That gets you lights, motion sensors and thermos at least.
Dean Roddey
Explorans limites defectum
Reply
#3
(04-09-2019, 05:37 PM)Dean Roddey Wrote: For lighting, unless you have the depth of pocket to afford a wired system, Lutron's Radio RA2 is pretty much the standard option for serious systems. That gets you lights, motion sensors and thermos at least.

What actually prompted this post is that we're doing the lighting wiring right now. In my old house I had cat 6 running to all switches which were just contact closures on an m1 connected to cqc. The lights themselves were all on relays in a board in the mechanical room. I could then apply whatever logic i wanted to control the lights and didn't use a lighting controller. So I'm a little ignorant of which is the best approach.

It meant no dimming and also I found the M1 slightly unreliable with power supplies and occasionally the relay boards would need to be reinstalled. This is a problem with the wife when she can't turn on the lights and you're out of town.

I'm looking at the homeworks QS but no point in spending money if it's not necessary. Hard to find the prices online without being a reseller.
Reply
#4
It depends on where you are in regards to lighting.

UK/UA/Asia then Schneider [Clipsal] C-Bus is the definite winner here.

The guys in the US did not support it well enough so Square D pulled it form the market unfortunately.

If in the EU then I believe KNX is big there and it would be great to see KNX support in CQC.  Companies like ABB are big into KNX - I'm sure there are many others in the market as well.

For security, everyone goes with the M1 but I would suggest you take a look at the Cytech Comfort system - very similar in concept to the M1 but more advanced (IMO).

For the various relay control - Go with a ClickPLC. So cheap and so flexible in what it can do. New Ethernet PLC's are now available so the driver needs to be updated for that.

HVAC - There is a company called Cool Automation that do modules for most popular AC systems. They do a HA interface that I have written the driver for but not yet commissioned. This may give you more options in selection of a system.
Mykel Koblenz
Illawarra Smart Home
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Build a new House lanski 19 1,724 02-11-2013, 10:21 AM
Last Post: bbrendon
  Could not build graph - CQSL Audio Player jmwhooper 6 1,166 05-29-2009, 08:59 AM
Last Post: Dean Roddey
  Could not build the filter graph for file error in CQC audio player rm1759 6 1,730 01-05-2008, 12:22 PM
Last Post: martino
  Component Wish list and new build info Calvin 40 5,170 07-27-2007, 05:01 PM
Last Post: pseigler

Forum Jump:


Users browsing this thread: 1 Guest(s)