Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Official 5.3 Beta Discussion Thread
OK, I *think* I see what is going on. I think it thinks it worked and starts sending secure messages, but the driver isn't processing them because it doesn't think it worked. So the driver has some queued up nonces. It's apparently not flushing the nonce list when it starts a new replication, so if a nonce arrived just before that it still has it stored away and tries to use it instead of asking for a new one. So the first secure msg STs sends after the replication, as it's bootstrapping up the security stuff, fails to decrypt. I see the driver using a nonce it has stored, but never see one having been sent.

But, the only way that could happen is if STs is not using a rotating nonce id, which it really should. Else every nonce looks like it would be valid for the incoming message. But I'll have to see some more secure messages to tell that.

Anyway, I need to add a flush of my nonce queues upon starting a new replication. Then we can give that a try. I'll get a new drop up tomorrow with that fix.
Dean Roddey
Explorans limites defectum
Dean, now that z-wave is out in testing, do you think you can take a look at adding Hue Dimmer support?   Big Grin
do the needful ...
Hue | Sonos | Harmony | Elk M1G // Netatmo / Brultech
Let’s get a little further into zwave first?.
|Z-Wave|Sonos|Tivo|Hue|Plex|Roku|MyMovies|Echo|
Nest|Harmony|Neeo|LG TV|Smarthings|
Yeh, I can't get distracted from this stuff until it's solid. I've put in so much time to get fully spun on it, so I need to make use of those brain cells before they die.
Dean Roddey
Explorans limites defectum
OK, give, 5.2.901 a shot. FIRST THOUGH, delete the configuration file if it got created, so:

1. Unload the driver
2. Delete the config file where xxx is the monker you gave the driver.
[cqc]\CQCData\Server\Data\ZWaveUSB3S\xxx.cfg
3. To be extra sure, delete:
[cqc]\CQCData\Server\Drivers\ZWaveUSB3*
4. Load up the driver again to get the new stuff


Normally these extra steps wouldn't ever be required, but I changed the format and don't want to start building up evolutionary baggage already.

If it doesn't come up right, get me another trace like before:

1. Exclude the driver from STs
2. Open (or Reset) the trace file
3. Do one inclusion from STs
4. Close the trace file
5. Post the generated trace file
Dean Roddey
Explorans limites defectum
Alas i'm on travel until *NEXT* Sunday (4/8) and only in town for 24 hours, so will look at this on 4/14.
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
does this work on all zstick, or does it have to be the newest?
do the needful ...
Hue | Sonos | Harmony | Elk M1G // Netatmo / Brultech
It probably needs to be the Aeon Gen 5, just to be safe. Even if it not now, at any point I might use some feature that only would be supported on the new ones.
Dean Roddey
Explorans limites defectum
Unfortunately, no joy on 5.2.901.
I followed the instructions in the release to delete the config and ZWaveUSB3S folder. Inclusion shows in ST but CQC looks like nothing happened. InZWNetwork shows false after the attempt. 

I am also getting an error when turning on tracing on the driver. Error and trace files are attached.

If you get to the point where you want a system to dig into with ST, let me know and I can get you remoted in. We might have to schedule it tho, my work hours have been crazy or I have been stuck trying to finish up work at home.


Attached Files
.png   2018-03-29 18_44_49-error.png (Size: 87.5 KB / Downloads: 2)
.txt   Trace.Txt (Size: 7.94 KB / Downloads: 3)
Robert
I had a similar experience but didn't get a trace. Has anyone tried the process posted above? Has anyone walked through the steps I linked to above? I seem to remember that there was a special device type needed to associate with the vrcop.
|Z-Wave|Sonos|Tivo|Hue|Plex|Roku|MyMovies|Echo|
Nest|Harmony|Neeo|LG TV|Smarthings|


Possibly Related Threads...
Thread Author Replies Views Last Post
  5.5 Beta Discussions Thread Dean Roddey 3 63 Yesterday, 03:50 PM
Last Post: Dean Roddey
  Official 5.5 Beta Release Thread Dean Roddey 1 31 06-23-2019, 12:22 PM
Last Post: Dean Roddey
  Official 5.4 Beta Discussion Thread Dean Roddey 441 42,167 06-15-2019, 02:33 AM
Last Post: Bugman
  Official 5.4 Beta Release Thread Dean Roddey 55 7,423 06-07-2019, 07:02 PM
Last Post: Dean Roddey
  Official 5.3 Release Thread Dean Roddey 27 7,994 07-05-2018, 12:44 PM
Last Post: Dean Roddey
  Official 5.2 Beta Discussion Thread Dean Roddey 244 88,173 10-14-2017, 07:57 PM
Last Post: Dean Roddey
  Official 5.2 Beta Release Thread Dean Roddey 13 8,861 10-09-2017, 06:49 PM
Last Post: Dean Roddey
  Official 5.1 Beta Discussion Thread Dean Roddey 453 198,473 05-16-2017, 03:45 PM
Last Post: Dean Roddey
  Official 5.1 Beta Release Thread Dean Roddey 28 19,652 05-12-2017, 05:44 PM
Last Post: Dean Roddey
  Official 5.0 Beta Discussions Dean Roddey 2,019 492,514 11-09-2016, 04:34 PM
Last Post: Dean Roddey

Forum Jump:


Users browsing this thread: 2 Guest(s)