Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
4.3 Beta Discussion Thread
#21
Has anyone else had an issue with the installer for .900?
Dean Roddey
Explorans limites defectum
#22
I'll be downloading and trying it again today.
Thanks
George M
#23
4th download worked. Will let you know.
Thanks
George M
#24
Looks like we went backwards.

Installed 4.2.900
Reset VRC0P to factory default
Included VRC0P into network
Reincluded the lock into the network.
Optimized the network
Checked routing, All passed three times
Deleted and installed the ZWave driver.
All units show up in client driver
In Field Browser - ALL units show in error - None show status
Here is snippet of log file taken from when driver was re-installed

CQCServer, CQCServer_DriverCtrl.cpp.222, Status/App Status
Remote client forcing load of driver. Moniker=ZWave. M/M/V=Leviton/VCROP/1.1
}
12/10 11:40:45-Study-PC, CQCServer, CIDOrbSrvWorkThread_1
{
CQCServer, CQCServer_DriverCtrl.cpp.301, Status/App Status
Remotely loaded driver ZWave loaded successfully
}
12/10 11:43:16-Study-PC, CQCServer, CQCDrv_ZWaveThread14
{
ZWaveLeviS, ZWaveLeviS_DriverImpl3.cpp.413, Failed/Transmit Failed, Error: 1003/0/0
The msg transmission failed
ZWaveLeviS_DriverImpl.cpp - 1614

}
12/10 11:43:16-Study-PC, CQCServer, CQCDrv_ZWaveThread14
{
CQCKit, ZWaveLeviS_DriverImpl.cpp.1623, Status/App Status
(Driver=ZWave) - Exception occured while polling. Units=17
}
12/10 11:45:17-Study-PC, CQCServer, CQCDrv_ZWaveThread14
{
ZWaveLeviS, ZWaveLeviS_DriverImpl3.cpp.413, Failed/Transmit Failed, Error: 1003/0/0
The msg transmission failed
ZWaveLeviS_DriverImpl.cpp - 1614

}
12/10 11:45:17-Study-PC, CQCServer, CQCDrv_ZWaveThread14
{
CQCKit, ZWaveLeviS_DriverImpl.cpp.1623, Status/App Status
(Driver=ZWave) - Exception occured while polling. Units=17
}
12/10 11:47:18-Study-PC, CQCServer, CQCDrv_ZWaveThread14
{
ZWaveLeviS, ZWaveLeviS_DriverImpl3.cpp.413, Failed/Transmit Failed, Error: 1003/0/0
The msg transmission failed
ZWaveLeviS_DriverImpl.cpp - 1614

}
12/10 11:47:18-Study-PC, CQCServer, CQCDrv_ZWaveThread14
{
CQCKit, ZWaveLeviS_DriverImpl.cpp.1623, Status/App Status
(Driver=ZWave) - Exception occured while polling. Units=17
}
12/10 11:49:19-Study-PC, CQCServer, CQCDrv_ZWaveThread14
{
ZWaveLeviS, ZWaveLeviS_DriverImpl3.cpp.413, Failed/Transmit Failed, Error: 1003/0/0
The msg transmission failed
ZWaveLeviS_DriverImpl.cpp - 1614

}
12/10 11:49:19-Study-PC, CQCServer, CQCDrv_ZWaveThread14
{
CQCKit, ZWaveLeviS_DriverImpl.cpp.1623, Status/App Status
(Driver=ZWave) - Exception occured while polling. Units=17
}


AS you can see nine minutes have passed with nothing showing good in Field Browser.
Thanks
George M
#25
It looks like the VRCOP was already in the locked up state when took that log snap. I seriously doubt the driver could have whacked it that fast. Just unplug and plug the VRCOP back in and see what happens. It would have also been best to unload the driver before you did all that as well. Try just removing the driver, unplug and plug back in the VRCOP, then load the driver. Who knows what you could have do if the driver was pounding away (and getting all kinds of wierd results due to what you were doing), while the Leviton software was also banging on it.
Dean Roddey
Explorans limites defectum
#26
Dean Roddey Wrote:It looks like the VRCOP was already in the locked up state when took that log snap. I seriously doubt the driver could have whacked it that fast. Just unplug and plug the VRCOP back in and see what happens. It would have also been best to unload the driver before you did all that as well. Try just removing the driver, unplug and plug back in the VRCOP, then load the driver. Who knows what you could have do if the driver was pounding away (and getting all kinds of weird results due to what you were doing), while the Leviton software was also banging on it.

When I get home again, I will unplug and then put back in. The driver was not loaded when I was doing all that to the network. It was not plugged into the VRC0P. I had the com port set up to Hyperterminal to verify the lock was working correctly. It was only after all the network stuff was complete that I switched the com port back to cqc. It was at that time I was getting nothing on the Field Browser, so I then uninstalled and re-installed the driver.
Thanks
George M
#27
I dunno, mon. I think you have other issues, but not sure what. If the driver was that whacked no one would be having any success with it. What is unit 17? That looked to be the problematic one, or are you getting failure to transmit on any of them it tries to poll? The difference would be significant, i.e. the former would indicate an issue with the module or between the module and VRCOP, while the latter would point to the VRCOP.

When you were using the terminal to test, what all were you doing there? BTW, you are doing the baud rate setup on that guy after donig a reset, right? The driver wants it at a higher baud than would be the case after a reset.
Dean Roddey
Explorans limites defectum
#28
Yes, the last thing I do with HT is set the baud to 57600.
I cant do anything more with it today. I will get into it more tomorrow.
Thanks
George M
#29
Dean, I saw that you added a driver for the pentair intelli touch. I have one of those that I use with screen logic so my unit is on the home network via a protocol adapter. Will this driver work with that setup?
#30
I'm not completely hip on how it all works, but the protocol document really was for a protocol adaptor, not for the Pentair itself. It's a little gray'ish plastic widget, right? So probably you are good.
Dean Roddey
Explorans limites defectum


Possibly Related Threads...
Thread Author Replies Views Last Post
  Official 5.4 Beta Discussion Thread Dean Roddey 441 41,754 06-15-2019, 02:33 AM
Last Post: Bugman
  Official 5.4 Beta Release Thread Dean Roddey 55 7,321 06-07-2019, 07:02 PM
Last Post: Dean Roddey
  Official 5.3 Beta Discussion Thread Dean Roddey 815 151,298 07-05-2018, 12:44 PM
Last Post: Dean Roddey
  Official 5.3 Release Thread Dean Roddey 27 7,910 07-05-2018, 12:44 PM
Last Post: Dean Roddey
  Official 5.2 Beta Discussion Thread Dean Roddey 244 87,644 10-14-2017, 07:57 PM
Last Post: Dean Roddey
  Official 5.2 Beta Release Thread Dean Roddey 13 8,804 10-09-2017, 06:49 PM
Last Post: Dean Roddey
  Official 5.1 Beta Discussion Thread Dean Roddey 453 197,127 05-16-2017, 03:45 PM
Last Post: Dean Roddey
  Official 5.1 Beta Release Thread Dean Roddey 28 19,502 05-12-2017, 05:44 PM
Last Post: Dean Roddey
  Official 5.0 Beta Discussions Dean Roddey 2,019 489,144 11-09-2016, 04:34 PM
Last Post: Dean Roddey
  Official 5.0 Beta Release Thread Dean Roddey 15 13,314 11-01-2016, 10:32 AM
Last Post: Dean Roddey

Forum Jump:


Users browsing this thread: 1 Guest(s)