Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Elk Client Interface Gremlins
#1
Tried to make a change in the Elk Client interface last night (moved one thing from zone 17 to 34) from my laptop. Wouldn't save. Now every time I pull up the Elk client interface it immediately has a star, I try to save it, nothing happens. I even rebooted the MS and the laptop, nothing.

Also, when I try to do the save every single one of my Elk-based triggers fires, ie lighting.

How do I flush this out?
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply
#2
What version of the Elk driver are you using? Is this the new V2 one? I just gave that one a try and it's working OK for me. Is the driver connected OK?

And of course flush the logs, try to save, and see what shows up.
Dean Roddey
Explorans limites defectum
Reply
#3
V2.21, which I would think is the latest. It is V2 compatible.

It was all working 100% just fine until I tried to change the zone # of a field, and then all went to hell. IE, I had a zone/name pair setup, changed just the zone#.

RDP'ing into server then will flush/save, post in next comment.

this is the logs.

Code:
12/16 13:01:41-DESKTOP-DELL, CQCEventSrv, CQCEventWorkerThread1
{
    CQCEventSrv, CQCEventSrv_ThisFacility.cpp.2165, Info/App Status
    Started processing triggered event 'Lights-MBRCloset: Turn off if door closed'
}
12/16 13:01:41-DESKTOP-DELL, CQCEventSrv, CQCEventWorkerThread1
{
    CQCEventSrv, CQCEventSrv_ThisFacility.cpp.2208, Info/App Status
    Triggered event 'Lights-MBRCloset: Turn off if door closed' completed successfully
}
12/16 13:01:42-DESKTOP-DELL, CQCEventSrv, CQCEventWorkerThread2
{
    CQCEventSrv, CQCEventSrv_ThisFacility.cpp.2165, Info/App Status
    Started processing triggered event 'KeyFOB-Button1'
}
12/16 13:01:42-DESKTOP-DELL, CQCEventSrv, CQCEventWorkerThread2
{
    CQCEventSrv, CQCEventSrv_ThisFacility.cpp.2208, Info/App Status
    Triggered event 'KeyFOB-Button1' completed successfully
}
12/16 13:01:46-DESKTOP-DELL, CQCEventSrv, CQCEventWorkerThread1
{
    CQCKit, CQCKit_ThisFacility.cpp.3601, Failed/Not Found, Error: 6006/0/0
    Driver 'Lighting' does not seem to be loaded at this time
    /CQC/CQCServer/Drivers/Lighting
}
12/16 13:01:46-DESKTOP-DELL, CQCEventSrv, CQCEventWorkerThread1
{
    CQCKit, CQCKit_ThisFacility.cpp.654, Failed/Data Format, Error: 6257/0/0
    Token expansion failed during command processing. Reason: An eerror occured while replacing field token at offset 39
    $(Lighting.LGHT#Sw_Basement-Crawlspace)
      <CQCEventSrv> CQCEventSrv_ThisFacility.cpp - 2223

}
12/16 13:01:46-DESKTOP-DELL, CQCEventSrv, CQCEventWorkerThread1
{
    CQCEventSrv, CQCEventSrv_ThisFacility.cpp.2228, Status/App Status
    Scheduled/Triggered event 'FurnaceRoom' failed
}
12/16 13:02:02-DESKTOP-DELL, CQCWebSrv, CQCWebSrvWorkerThread3
{
    CIDSChan, CIDSChan_SChan_Win32.cpp.359, Failed/Cannot Do, Error: 5003/0/0
    Could not acquire credentials. Name=Secure Server Data Source, Code=2148074254
      <CQCWebSrv> Win32\CIDSChan_SChan_Win32.cpp - 390

}
12/16 13:02:02-DESKTOP-DELL, CQCWebSrv, CQCWebSrvWorkerThread3
{
    CQCWebSrvC, CQCWebSrvC_WorkerThread.cpp.231, Failed/App Status
    An exception occured in a web server worker thread
}
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply
#4
Those triggered events are all the Elk ones I mentioned, nothing was actually triggered but the field value must have given the save, hence it firing off CQC.
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply
#5
Nothing in there from the Elk driver at all. You tried a save during that log dump capture?
Dean Roddey
Explorans limites defectum
Reply
#6
Correct, nothing else
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply
#7
Can you stop the service on the machine where the Elk driver is loaded and send me the repo file?

[cqc]\CQCData\Repository\CIDCfgSrvRepo.CIDObjStore

I'll load it up here and try to see what is going on.
Dean Roddey
Explorans limites defectum
Reply
#8
just emailed it. Also for grits & shins I tried closing without saving to see if it would discard whatever it had, no luck. When I immediately reopen the client interface the star still comes up.
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply
#9
Give 5.3.925 a try, which I just posted. There was an issue in the thermocouple info class that caused what you were seeing. Unless you defined a thermocouple it never showed up, so probably why it hadn't been seen yet.
Dean Roddey
Explorans limites defectum
Reply
#10
Looks like that did the trick. Thanks!
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  SOLVED: VLC dll Issues with CQC Interface Template Viewer gReatAutomation 3 178 06-17-2019, 06:17 AM
Last Post: gReatAutomation
  ELK M1 Client Interface question lleo 1 81 06-12-2019, 08:15 AM
Last Post: Dean Roddey
  Admin interface and CML IDE interface issue lleo 5 649 01-11-2019, 03:07 PM
Last Post: Dean Roddey
  why master server needs DHCP client running? lleo 4 573 01-04-2019, 01:13 PM
Last Post: Dean Roddey
  Copy and Paste into Global Cache Client Interface kblagron 3 850 11-01-2018, 02:23 PM
Last Post: kblagron
  "Client Side Driver Directory Could Not be Cleaned Out" TurboSam 15 2,286 09-27-2018, 01:43 PM
Last Post: TurboSam
  Admin Client over VPN batwater 1 837 08-18-2018, 04:31 PM
Last Post: Dean Roddey
  HTML5 and Webriva and the Interface Veiwer ghurty 1 865 07-11-2018, 10:50 PM
Last Post: Dean Roddey
  Does anyone have a nice interface set up using the new webRiva system? ghurty 0 744 05-15-2018, 03:13 PM
Last Post: ghurty
  Preview of new Web based RIVA client Dean Roddey 464 138,451 04-07-2018, 12:13 PM
Last Post: Dean Roddey

Forum Jump:


Users browsing this thread: 1 Guest(s)