Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sony TV IP driver
#1
Anyone ever write a Sony TV IP driver?
Reply
#2
Not as far as I know.

I need one as well - both for my system and a friends.

Its on my long list of drivers to do, but if someone else gets to it before me I would not complain
Mykel Koblenz
Illawarra Smart Home
Reply
#3
What is the protocol for those guys?
Dean Roddey
Explorans limites defectum
Reply
#4
two protocols - simple and other. Simple works well , we can even turn the TV on via IP command.

Protocol is attached in this post

http://www.charmedquark.com/vb_forum/sho...#pid149439
Mykel Koblenz
Illawarra Smart Home
Reply
#5
The low level protocol isn't the stupidest one ever created. And that's saying something for a TV. And it even sends async notifications, so it wouldn't have to be polled.
Dean Roddey
Explorans limites defectum
Reply
#6
(07-28-2018, 10:47 AM)Dean Roddey Wrote: The low level protocol isn't the stupidest one ever created. And that's saying something for a TV. And it even sends async notifications, so it wouldn't have to be polled.

well for now I guess I  will have to use my global cache until if and when a driver is written.
Reply
#7
I edited the wrong msg above. What was supposed to be part of the msg you responded to was:

"If you want, I can create a basic outline of a driver using some dummy data that will handle all the basic scenarios. Since you have one, you could then just add the rest of the commands and notifications and test them out. That would just be more of the same."
Dean Roddey
Explorans limites defectum
Reply
#8
(07-28-2018, 12:46 PM)dogman Wrote:
(07-28-2018, 10:47 AM)Dean Roddey Wrote: The low level protocol isn't the stupidest one ever created. And that's saying something for a TV. And it even sends async notifications, so it wouldn't have to be polled.

well for now I guess I  will have to use my global cache until if and when a driver is written.

You can use the generic IP driver.  I do that now to turn the TV off at night.  You can easily have one way control sending the raw commands to the TV
Mykel Koblenz
Illawarra Smart Home
Reply
#9
(07-29-2018, 12:59 PM)znelbok Wrote:
(07-28-2018, 12:46 PM)dogman Wrote:
(07-28-2018, 10:47 AM)Dean Roddey Wrote: The low level protocol isn't the stupidest one ever created. And that's saying something for a TV. And it even sends async notifications, so it wouldn't have to be polled.

well for now I guess I  will have to use my global cache until if and when a driver is written.

You can use the generic IP driver.  I do that now to turn the TV off at night.  You can easily have one way control sending the raw commands to the TV
you give me too much credit Smile .  I don't even know where to start.  If you want to share a snippet of how you do that I would give it a go.
Reply
#10
My Hunter Douglas controller hasn't arrived (and I'm not sure if it's shipped yet either), so if one of you wants to open up his TV I'd be willing to get a basic V2 compatible driver done.
Dean Roddey
Explorans limites defectum
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  OpenHAB Driver whozeawhat 6 1,650 01-16-2019, 06:45 AM
Last Post: greymatter
  LIFX Driver bobskie708 14 2,792 01-10-2019, 06:36 PM
Last Post: Dean Roddey
  XBMC Driver wuench 428 175,910 12-28-2018, 11:07 AM
Last Post: dogman
  Amazon Echo Hue Simulator Driver wuench 117 45,111 12-24-2018, 11:10 AM
Last Post: Dean Roddey
  RunTimer2 driver rbroders 15 4,757 12-14-2018, 05:28 PM
Last Post: rbroders
  Driver for Bigass Fan lleo 7 446 11-25-2018, 08:57 AM
Last Post: Dean Roddey
  Generic Modbus Driver - Serial & IP znelbok 25 13,529 10-09-2018, 08:59 AM
Last Post: Ron Haley
  Issues debugging IP based driver jnolting 5 798 09-24-2018, 11:52 AM
Last Post: Dean Roddey
  Enhance Driver Test Harness Field Monitor rbroders 1 504 09-24-2018, 10:49 AM
Last Post: Dean Roddey
  Koyo Click PLC Driver rbroders 75 30,245 09-23-2018, 01:18 PM
Last Post: rbroders

Forum Jump:


Users browsing this thread: 1 Guest(s)