Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HAI Driver Issue
#1
I upgraded to 5.2.11 and my HAI driver is not working.
The Driver Status is: Wait to Connect

I know the IP is working on the HAI panel because I can see and control it form my phone app just fine.

I have an old V1 driver that connects fine.

I tried to reconfig the driver
I also tried to delete and start from scratch...no Joy

Ideas?
Reply
#2
I got it going.

I had a couple of zones that were bypassed.
I brought them back online and then reconfig the driver and it connected.

Hopefully that fixed it for good!
Reply
#3
Hmm.... Maybe there's something about bypassed zones that is confusing it. I'll put that on the list to look at.
Dean Roddey
Software Geek Extraordinaire
Reply
#4
Could you flush the logs, then bypass a zone and see if that makes it go off line? If so, put the driver into high verbosity, let it run for ten or fifteen seconds, then turn verbose logging off and get me a log dump?
Dean Roddey
Software Geek Extraordinaire
Reply
#5
As a data point, I ran into the same issue recently and it was a bypassed zone. I meant to post but forgot.
Reply
#6
OK, I'll be taking a look at that in the next day or so.
Dean Roddey
Software Geek Extraordinaire
Reply
#7
OK, I've got that fixed for the next drop. Actually this error was introduced a long time ago but not caught because it was using the wrong enumeration to text translation, but both them returned the same value for the first two values (Disarmed and Armed.) They only returned different values for the bypassed modes. So it wouldn't fail until you bypassed one.
Dean Roddey
Software Geek Extraordinaire
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  CQC to PowerView Hub via Serial Driver Deane Johnson 18 523 05-14-2018, 01:11 PM
Last Post: Deane Johnson
  Monoprice 8x8 HDMI matrix Driver NightLight 13 2,832 09-04-2017, 09:45 AM
Last Post: Dean Roddey
  ELK V2 Driver - AreaArm field & Triggers? sic0048 4 1,081 08-19-2017, 04:46 PM
Last Post: Dean Roddey
  UPB Driver Issue tcmcgec 6 2,114 01-27-2017, 07:18 PM
Last Post: Dean Roddey
  HAI OmniProII Driver problems MBurger 4 1,729 12-24-2016, 07:59 AM
Last Post: Dean Roddey
  Onkyo NR646 and Universal Integra Driver? Sendero 6 2,186 10-31-2016, 11:22 PM
Last Post: Sendero
  Train HTTP Trigger Driver jkmonroe 24 6,944 10-25-2016, 11:55 AM
Last Post: karenlee
  ISY driver repeatedly losing connection Sendero 14 3,563 09-28-2016, 07:44 PM
Last Post: Dean Roddey
  EventGhost alternatives to getting driver/field *TO* SmartPhone? IVB 37 5,786 08-13-2016, 07:32 PM
Last Post: IVB
  Elk M1 V2 Driver - Can't Arm/Disarm in UI? Sendero 7 2,666 03-20-2016, 07:11 AM
Last Post: IVB

Forum Jump:


Users browsing this thread: 1 Guest(s)