Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Z-Wave driver preview
#31
Okay, here you go, same as I posted above...

ZWAVE Driver: (empty)

Z-Wave USB3 Trace
, Time: 4:41:25 PM
----------------------------------------------------

CQC Trace (did it twice)

07/06 16:41:32-NCC1701-D, CQCServer, CQCDrv_zwaveThread23
{
CQCKit, CQCDriver_DriverBase.cpp.7204, Failed/Not Ready, Error: 2017/0/0
Field 'MBR_Foyer_Switch' is currently in error state
<CQCServer> CQCDriver_DriverBase.cpp - 8696

}
07/06 16:41:29-NCC1701-D, CQCServer, CQCDrv_zwaveThread23
{
CQCKit, CQCDriver_DriverBase.cpp.7204, Failed/Not Ready, Error: 2017/0/0
Field 'MBR_Foyer_Switch' is currently in error state
<CQCServer> CQCDriver_DriverBase.cpp - 8696
<CQCServer> CIDOrb_ThisFacility.cpp - 536
<CQCAdmin> CQCKit_CQCSrvAdminClientProxy.cpp - 1945
<CQCAdmin> CQCAdmin_DrvMonTab.cpp - 1325

}
07/06 16:41:38-NCC1701-D, CQCServer, CQCDrv_zwaveThread23
{
CQCKit, CQCDriver_DriverBase.cpp.7204, Failed/Not Ready, Error: 2017/0/0
Field 'MBR_Foyer_Switch' is currently in error state
<CQCServer> CQCDriver_DriverBase.cpp - 8696

}
07/06 16:41:35-NCC1701-D, CQCServer, CQCDrv_zwaveThread23
{
CQCKit, CQCDriver_DriverBase.cpp.7204, Failed/Not Ready, Error: 2017/0/0
Field 'MBR_Foyer_Switch' is currently in error state
<CQCServer> CQCDriver_DriverBase.cpp - 8696
<CQCServer> CIDOrb_ThisFacility.cpp - 536
<CQCAdmin> CQCKit_CQCSrvAdminClientProxy.cpp - 1945
<CQCAdmin> CQCAdmin_DrvMonTab.cpp - 1325

}
Reply
#32
OK, so it never gets to the point of sending anything. I'm guessing that because it's write only the field never gets set to non-error state because nothing ever gets written to it or something. I'll check that.
Dean Roddey
Explorans limites defectum
Reply
#33
my zWave driver shows black but the field list is all blank. Both client interface & driver. The Aeotec is on a 2ndary server, before I try rebooting I want to ask you if I should do any tests.
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply
#34
Have you replicated from the master?
Dean Roddey
Explorans limites defectum
Reply
#35
Yes, a few days ago. I had 25ish devices, fields for each one.

It was all going fine, I renamed a bunch of lights, then couldn't understand why my scheduled events stopped working. When I pulled up the AI, I realized all my fields were gone.
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply
#36
I ran a CQCNetTest last night from the MS, this is what it showed.

The 2ndary server is MINI-PC


Attached Files
.zip   CQCnet.zip (Size: 2.49 KB / Downloads: 1)
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply
#37
I haven't yet rebooted the 2ndary or the MS, was waiting to see if anything else needed to be done first.
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply
#38
Actually, we needed to go the other way I think, from the problematic secondary.

In the meantime, I put up a preliminary 5.3.1 release for you and Ben to try to make sure it handles the issues you have (in your case the new Z-Wave unit support.)

http://www.charmedquark.com/Web2/Downloa..._5_3_1.exe
Dean Roddey
Explorans limites defectum
Reply
#39
ok this is from the 2ndary server. There is a fail at the very end. Will wait to reboot & also install 5.3.1 to see if that fixes anything.

Code:
CQC Network Info Test
Copyright (c) Charmed Quark Systems


System Information
--------------------------------
      OS Version: 6.2.0, Build: 9200
         IP Name: MINI-PC
       Host Name: MINI-PC
Local Date/Time: 5:15:58 2018 -0700
     TCP Version: 2.2


Network Adaptor Information
--------------------------------
  {52E76AFA-B293-4CC7-A4B8-64CDC948153D}
  Broadcom 802.11ac WDI SDIO Adapter
           Ready: False
    DHCP Enabled: True
    IPV4 Enabled: True
    IPV6 Enabled: True
     Is Loopback: False
       Is Tunnel: False
       Dedicated: True
   Hardware Addr: AC 83 F3 8C 21 99
    Address #0: fe80::7ca3:907e:a115:507f%7
    Address #1: 169.254.80.127

  {D3987A32-EE87-4AC3-8863-32516756B5B1}
  Microsoft Wi-Fi Direct Virtual Adapter #4
           Ready: False
    DHCP Enabled: True
    IPV4 Enabled: True
    IPV6 Enabled: True
     Is Loopback: False
       Is Tunnel: False
       Dedicated: True
   Hardware Addr: AE 83 F3 8C 21 99
    Address #0: fe80::55a4:9f6a:155f:b420%13
    Address #1: 169.254.180.32

  {2B3B7834-709E-4523-9081-13C3AA2AE8A6}
  Microsoft Wi-Fi Direct Virtual Adapter #5
           Ready: False
    DHCP Enabled: True
    IPV4 Enabled: True
    IPV6 Enabled: True
     Is Loopback: False
       Is Tunnel: False
       Dedicated: True
   Hardware Addr: AE 83 F3 8C 29 99
    Address #0: fe80::14d0:d1db:7eb7:84c6%5
    Address #1: 169.254.132.198

  {9BE0F559-C411-441A-A178-CC09AB32A52A}
  Realtek PCIe GBE Family Controller
           Ready: True
    DHCP Enabled: True
    IPV4 Enabled: True
    IPV6 Enabled: True
     Is Loopback: False
       Is Tunnel: False
       Dedicated: True
   Hardware Addr: A0 1E 0B 08 88 C5
    Address #0: fe80::a85a:71d3:ba43:fca5%12
    Address #1: 192.168.3.54

  {53375597-C7A4-480B-98C1-41A859875D01}
  Bluetooth Device (Personal Area Network)
           Ready: False
    DHCP Enabled: True
    IPV4 Enabled: True
    IPV6 Enabled: True
     Is Loopback: False
       Is Tunnel: False
       Dedicated: True
   Hardware Addr: AC 83 F3 8C 21 9A
    Address #0: fe80::14c6:9c08:a378:6143%8
    Address #1: 169.254.97.67

  {AEC22B24-50D5-11E8-957D-806E6F6E6963}
  Software Loopback Interface 1
           Ready: True
    DHCP Enabled: False
    IPV4 Enabled: True
    IPV6 Enabled: True
     Is Loopback: True
       Is Tunnel: False
       Dedicated: True
   Hardware Addr:
    Address #0: ::1
    Address #1: 127.0.0.1


Environment Information
--------------------------------
      CID_NSADDR: HA-VM
DATADIR (client): C:\ProgramData\CQCData\A042B2F41B22D606-3EF63F660CBC6F6C
DATADIR (server): C:\Program Files (x86)\CQC\CQCData


Name Resolution
--------------------------------
    Reported Addr Families: IPV4 & IPV6

    Looking up host name (default address family): MINI-PC ...
    Resolved to: fe80::a85a:71d3:ba43:fca5%12
        Reverse: MINI-PC

   IPV4 Lookup: 192.168.3.54
   IPV6 Lookup: fe80::a85a:71d3:ba43:fca5%12

    Trying to resolve name server host [HA-VM.13502]
    Resolved to: 192.168.3.70:13502



CQC Connection Tests
--------------------------------
    Trying to connect to CQC name server
    Connected to name server successfully at: HA-VM.13502
       [192.168.3.70:13502]

    Testing Log Server...
        Server is registered at HA-VM.13503
        Log Server tests completed successfully.

    Testing MS Cfg Server...
        Server is registered at HA-VM.13504
        MS Cfg Server tests completed successfully.

    Testing Client Service...
        Server is registered at MINI-PC.13520
Test failed! Error=
01/01 00:00:00-MINI-PC, CQCNetTest, CQCNetTest
{
    CIDOrb, CIDOrb_ClientBase.cpp.456, Failed/Not Found, Error: 1006/0/0
    The server at fe80::a85a:71d3:ba43:fca5%12:13520 was not available
}
------------------------------------
Some of my devices: Sonos, Aeotec zWave, Nest, Rain8Net, Various H/T
What's next: CQC-Voice, Brultech GEM
My vlogs: https://www.youtube.com/c/IVBsHomeAutomation
Reply
#40
That is the local client service. I think we discussed this before. The client service needs to be running on all machines. I'm assuming that, if you run the AI on that secondary machine, you get the error about the client service not running?

Check the services and see if the client service is set to run automatically and is currently running. If not, start it and set it to start automatically. Then run the test again.
Dean Roddey
Explorans limites defectum
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Zigbee Driver adamalli 12 316 01-17-2019, 06:20 AM
Last Post: CouchPotatoe
  CML Driver IDE [copy/paste] does not work lleo 2 243 11-25-2018, 10:01 AM
Last Post: lleo
  How to update the new zwave stick/driver? ghurty 5 336 11-22-2018, 06:56 PM
Last Post: Dean Roddey
  "Client Side Driver Directory Could Not be Cleaned Out" TurboSam 15 1,408 09-27-2018, 01:43 PM
Last Post: TurboSam
  CML Driver IDE docs - where? rbroders 1 441 09-18-2018, 05:41 PM
Last Post: Dean Roddey
  Timer Driver Question kblagron 5 675 09-14-2018, 02:43 AM
Last Post: znelbok
  reset driver statistics? rbroders 9 1,212 09-11-2018, 07:50 PM
Last Post: Dean Roddey
  Driver Configuration w/8 prompts rbroders 1 599 09-03-2018, 09:28 PM
Last Post: Dean Roddey
  Driver info/stats rbroders 6 1,005 09-02-2018, 08:34 PM
Last Post: Dean Roddey
  Sonos Driver zra 3 701 09-01-2018, 03:09 PM
Last Post: Dean Roddey

Forum Jump:


Users browsing this thread: 1 Guest(s)