Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
USB ZWave Controller Configuration
#1
I just got an Aeotec Gen5 usb zwave controller. I added it as a zwave usb driver, but cant seem to get it to learn or display any of my nodes. I added it as a secondary controller using the zensys tool and it worked fine. I then added it to cqc and i could not get it to show anything. I tried learning from cqc but couldnt make it any further. 

CQC shows connected to the device and has details when viewing the driver, but when I go to the client interface, I dont get anything. Edit doesnt do anything, and when I click learn I get an Unhandled exception in GUI Thread "Cannot cast a TStaticText object into a TEntryField object". I have tried resetting and learning using CQC and resetting outside of cqc and learning. 

My primary controller is a SmartThings hub, and I dont seem to have any zwave problems with my VRC0P. I'm on CQC 5.1.4.. 

Hopefully its just something simple I am missing.
Reply
#2
The old USB Z-Wave driver is probably not worth messing with. It was only left around in case someone was using, which probably no one is by now and it will likely get dropped soon.

Today, basically it's the VRC0P one you'd need to use. I'm working on a new native USB stick one right now, but until then you'd have to use the VRC0P.
Dean Roddey
Software Geek Extraordinaire
Reply
#3
Hey Dean,

Any idea when this new USB ZWave driver might appear?

I began moving away from CQC back in January, largely because I couldn't find a tidy way to integrate ZWave into my system.  I gave up when I didn't get any suggestions re:

http://www.charmedquark.com/vb_forum/sho...?tid=10085

If there is a USB ZWave driver close to becoming available, I might dust off my CQC and come back into the fold ;-)  It was pretty painful moving away from CQC after using it for so many years.

Thanks, Neil
Reply
#4
I imagine it'll be a month or so before I get a first drop out for folks to play with. It's pretty complex and there will be some other distractions in there as well inevitably. But not terribly long. It may go quicker as well, I'm just being a bit conservative because of the devil in the details thing. I may end up spending a bunch of time on some small thing.
Dean Roddey
Software Geek Extraordinaire
Reply
#5
That sounds good  Smile

Guess I now have a reason to update my maintenance and upgrade to v5 ...

Thanks again,  Neil
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Fibaro RGB controller pinballmark 41 3,729 06-01-2017, 08:12 PM
Last Post: Dean Roddey
  RGB LED Controller NightLight 6 917 01-04-2017, 02:09 AM
Last Post: znelbok
  delete zwave devices? jkmonroe 8 796 05-23-2016, 08:46 AM
Last Post: Dean Roddey
  CIDLib Configuration Server could not be contacted Deane Johnson 64 2,738 05-02-2016, 06:46 AM
Last Post: Dean Roddey
  connecting a zWave relay IVB 3 698 02-20-2016, 03:13 PM
Last Post: IVB
  zwave device configuration jkmonroe 75 2,999 12-31-2015, 05:21 PM
Last Post: Deane Johnson
  No way to just pullin all lights from a driver for Room Configuration? Sendero 1 634 09-27-2015, 04:12 PM
Last Post: Dean Roddey
  ISY zWave controller IVB 4 1,052 06-21-2015, 09:21 AM
Last Post: Dean Roddey
  User Action on ZWave Keypad jkmonroe 18 1,270 04-04-2015, 05:46 AM
Last Post: jkmonroe
  New clean configuration Andre 3 744 02-14-2015, 01:53 PM
Last Post: Dean Roddey

Forum Jump:


Users browsing this thread: 1 Guest(s)