Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fibaro RGB controller
#21
Agreed, I'm just finishing up the wiring on LED lighting for my deck.  There will be pictures...   Wink
Reply
#22
(04-17-2017, 08:50 AM)Dean Roddey Wrote: Let us get 5.1 out, then we can take a look at some new bits and pieces like this.

Dean, Have put this on hold so you can focus on 5.1 but wanted to know if you want me to send you one of these units(to keep) so you have it when you find time?

I have tested it setup as a "Leviton/VRP03" and can send Invoke commands to change the canned light patterns.

Devices::FieldWrite
    P1=Holloween.InvokeCmd
    P2=SetCfgParam FibaroRGBW 72 7 1
    P3=True


Additionally, the controller supports up to four 0-10V passive analog sensors such as temperature sensors, humidity sensors, wind sensors, air quality sensors and light sensors. although I don't have this need but others may.

Would rather have CQC control my Zwave RGBWW lights directly instead of using my Hue or smartthings hubs. (one less device in the loop)

Thanks
Kevin
_______________
Denon 3808ci, 2112ci , SONOS, Russound CAA66,Z-Wave(Lights,Locks), Hue, SmartThings,
iPads,Tivo,Hikvision,Elk-M1,iTunes,TED5000,Somfy RTS blinds, Amazon Echo, Google Home, Polk XRT12,
Honeywell Wi-Fi 9000 & Caleo Wi-Fi Thermostats, Rainmachine
Reply
#23
Sure, if you want to send one I can take a look at it.
Dean Roddey
Software Geek Extraordinaire
Reply
#24
I have broken this guy out and just added it to my Z-Wave network so that I can start poking around with it a bit.
Dean Roddey
Software Geek Extraordinaire
Reply
#25
(05-31-2017, 04:20 PM)Dean Roddey Wrote: I have broken this guy out and just added it to my Z-Wave network so that I can start poking around with it a bit.

Cool, I could get these to work. So should help prove nothing broke in transit.

Devices::FieldWrite
   P1=Zwave.InvokeCmd
   P2=SetCfgParam FibaroRGBW 72 6 1
   P3=True

Here are the ones I tested.. (value 6-10)
------------------------------------
Fire Place paramNumber:72, value:6,  size:1
Storm paramNumber:72, value:7,  size:1
Deep Fade paramNumber:72, value:8,  size:1
Lite Fade   paramNumber:72, value:9,  size:1
Police paramNumber:72, value:10, size:1
_______________
Denon 3808ci, 2112ci , SONOS, Russound CAA66,Z-Wave(Lights,Locks), Hue, SmartThings,
iPads,Tivo,Hikvision,Elk-M1,iTunes,TED5000,Somfy RTS blinds, Amazon Echo, Google Home, Polk XRT12,
Honeywell Wi-Fi 9000 & Caleo Wi-Fi Thermostats, Rainmachine
Reply
#26
I've got some basic functionality in place, but it all seems wrong relative to the Z-Wave docs. I'm supporting it via the 'colored light' device class, so you set the color via HSV (which means it'll be settable via the color palette in the auto-generated interface and such.)

If I send the color components as indicated in the Z-Wave docs, red and green are transposed. If I flip those backwards the fibaro colors out correct. Is it possible that the guy is wired wrong? I can't imagine that the Z-Wave docs are that bad. It looks right according to the little sheet that comes with it, but somebody has to be wrong. I can clearly see what I'm sending out in the Z-Wave message, and I'm sending the right color components with the right component ids. But I have to flip red/green to get the right colors.

And, the other issue is that it never reports anything back but the green component. I query all three but it responds with the green component every time. I can't figure out what is going on there.
Dean Roddey
Software Geek Extraordinaire
Reply
#27
Nevermind about the querying of the values. I figured that one out, but the red/green transposition issue is definitely still there.
Dean Roddey
Software Geek Extraordinaire
Reply
#28
Well, I found other folks talking about the transposed Red/Green, so apparently it's the Fibaro. I'll put the driver back and you'll just have to wire the connections the other way.
Dean Roddey
Software Geek Extraordinaire
Reply
#29
OK, yeh, flipping the wires on the connection makes it work correctly. I still need to figure out why it doesn't respond to the basic off/on switch and multi-level switch command classes, but the color light stuff is working.
Dean Roddey
Software Geek Extraordinaire
Reply
#30
It is actually responding to the dimmer field, it's just that the dimming is very non-linear and it was changing so little that I didn't see it until I set the level quite low.

I need to figure out how to get this guy to send out reports, since I need to keep the dimmer, switch and color fields in sync and there's no direct connection there. If I don't get change reports that will be very difficult to make that work.
Dean Roddey
Software Geek Extraordinaire
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  USB ZWave Controller Configuration bobskie708 6 2,387 11-30-2017, 04:07 PM
Last Post: Dean Roddey
  RGB LED Controller NightLight 6 2,315 01-04-2017, 02:09 AM
Last Post: znelbok
  ISY zWave controller IVB 4 2,069 06-21-2015, 09:21 AM
Last Post: Dean Roddey
  Controlling Insteon Scene Controller buttons ellisr63 8 2,834 10-14-2014, 11:38 AM
Last Post: SomeWhatLost
  Elan Z·630 Series II multi-Room controller penngray 8 4,893 05-11-2009, 04:43 AM
Last Post: klindy
  Rain8Net Controller Help daddyd 17 3,874 05-01-2009, 06:19 AM
Last Post: beelzerob
  New to Zwave - HA22 controller personalt 3 1,658 08-30-2008, 12:34 PM
Last Post: Dean Roddey
  Do i need a HA controller? pjwinstalls 7 2,298 03-31-2007, 12:52 PM
Last Post: pjwinstalls
  Please help me understand how the CQC controller can work Roscoe62 5 2,053 03-26-2007, 07:45 PM
Last Post: Roscoe62
  Da-Lite SCB-200 Screen Controller available for testing jdmontague 1 1,318 03-22-2007, 08:28 PM
Last Post: jdmontague

Forum Jump:


Users browsing this thread: 1 Guest(s)