Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Auto Gen Issue
#1
I do not have enough brain power to diagnose this tonight, but I am getting the following error fairly consistently;

The command target with the indicated id could be found. Name='ThermoTileVal', Id='IWdgTarget:ThermoTileVal'

Sorry - But I will not have time to figure it out until tomorrow night.
Thanks,
Dave Bruner
Cool
Reply
#2
Hmmm... I'm guessing I must have let something related to the thermo stuff stay in even if thermostats aren't enabled, so the command is still there but the thermo tile got removed because you don't have one enabled. Oy! This stuff is so tricky to get right. I do all this testing, but then every little tweak towards the end to fix a little issue seems to bite me.

Let me check that out and I'll get another drop up tonight that takes care of it before I move on, so that I don't have to leave it whacked for days.
Dean Roddey
Explorans limites defectum
Reply
#3
Yeh, a reference to one of the thermo tile widgets is being referenced even though the tile has been removed. It was in the preload of the tiles template and I missed it. It was correctly being skipped in terms of running the action, but it was still referenced and that's enough to whack it.

I'll get that fixed.
Dean Roddey
Explorans limites defectum
Reply
#4
And the reason I got through was that, to speed up some checks at the end, I turned off some of the configured rooms (which have different combinations of stuff enabled), since I was having to repeatedly re-generate. I forgot to turn them back on at the end and so I missed the error.

Anyway, .14 fixes that issue, so it should be ok now. Sorry about that. Speed kills I guess.
Dean Roddey
Explorans limites defectum
Reply
#5
Hi Dean,

I noticed a minor display/position inconsistency with the auto-generated thermo stuff. The Heat/AC tile on the main page has the High SP on the left and the Low SP on the right. The thermostats page has them positioned opposite, Low SP on the left and High SP on the right...
Reply
#6
dgilpin Wrote:Hi Dean,

I noticed a minor display/position inconsistency with the auto-generated thermo stuff. The Heat/AC tile on the main page has the High SP on the left and the Low SP on the right. The thermostats page has them positioned opposite, Low SP on the left and High SP on the right...

Oops, I'll correct that. How is it working for you otherwise? Is this something that you consider a really significant product improvement?
Dean Roddey
Explorans limites defectum
Reply
#7
It's working out great!!! :-D I do indeed consider it a very significant improvement! It took me about 15 minutes to enter the Elk config info and do the auto-gen. I'm just controlling lights and furnaces now but the ease and minimal amount of time to go from just playing around in the field browser to a fully functional tablet (Dell Venue 11) control interface is truly amazing! High WAF is an added bonus...

I'm now motivated to get my TV/AVR/music/movies integrated next. Keep up the GREAT work!

Thanks,
Dave
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  4.5.20 autogen calendar questions... this is just a curiusity thing...no issue per se SomeWhatLost 3 2,500 10-13-2014, 08:00 PM
Last Post: Dean Roddey
  Auto-Gen Issue Two finish.06 9 3,656 08-26-2014, 08:08 AM
Last Post: Dean Roddey
  Auto-Generated Interface questions DaveB 40 15,947 08-16-2014, 03:29 PM
Last Post: DaveB
  Auto generation Error dpass 6 3,466 06-15-2014, 01:22 PM
Last Post: pbohannon
  Auto-gen error finish.06 6 3,188 06-10-2014, 02:32 AM
Last Post: finish.06
  HttpClient issue resolving IP jkish 60 19,284 07-24-2013, 12:48 PM
Last Post: jkish
  Error when trying to use Room Config - Auto Gen jokermac 4 3,317 04-19-2013, 06:46 PM
Last Post: Dean Roddey
  916 and 920 calc issue bbrendon 9 3,773 04-07-2013, 09:51 PM
Last Post: Dean Roddey
  918 AutoGen Issue Bugman 18 6,748 04-05-2013, 12:37 PM
Last Post: Bugman
  Timed field issue karenlee 6 2,883 02-21-2013, 03:47 AM
Last Post: karenlee

Forum Jump:


Users browsing this thread: 1 Guest(s)