HD Autopatch 1ydm 32x16

[Providince]

I have a High definition Autopatch 1ydm with 32 BNC input by 16 bnc output. I am switching to a Neothings 8x8 so looking to move this on. I would like for someone to get a good home for this.
What do you think is a fair price to ask for this? I was going to put it on Ebay but wanted to check here first. Any ideas would be appreciated.

[Hiller]

Do you know the bandwidth of the boards that are installed?

[Providince]

It is the high bandwidth model. I believe 350mhz. I verified this with Autopatch. I can post the serial number tonight when I get home. It has not been modified in any way.

[Hiller]

If you figure out how much you want for it I'm definitely in the market :)

[Providince]

Theres the rub. I am trying to figure out what a fair price is for this. My Neothings should be here in about a week. So I have a little time. What is a reasonable number?

[beelzerob]

Maybe you can search listings and completed listings on ebay for what you have, or something close...that's usually what I do to get a ballpark.

[sic0048]

So a 8x4 high bandwidth HD switcher.... (I realize it can switch any input to any output, so the 32x16 is probably a better technical discription.....but......)

E-bay is hard because there are so many varieties of units, and there is a huge price variation. I always love the guys who think they can get $900 for a 4x4 analog audio only switch :) I realize they might have cost that originally, but the used market is all about finding bargains.

So to end my rambling, I'm going to throw out $200-$250. It might go for more on E-Bay depending on the day, but I've seen them go for less too (including the one I bought).

[stormy]

Out of curiosity, why are you switching to the new gear? Did the Autopatch work for you?

[dirtracinfan]

I might be interested too.Does it do HI DEF only or composite/component with audio?I'm curious too as to why you switching.

[Providince]

The autopatch worked great. Ultimately I am trying to get leaner. I want to totally remove the computer from my AV gear setup. I am using the neothings because it is IR controllable without writing any code. I am currently using the USB-uirt receiving signals from my remotes IR repeater. That then sends a command to CQC which controls the autopatch.
I am removing the computer from the room altogether. I could go MSC400 and send serial command from that but wanted the 8x8. rather than the 8x4.

My setup will be as follows.
2x cav6.6
1x russound st2 AM/FM/XM
Neothings Borrego 8x8
4x Russound Ipod dock
Yamaha 5890 receiver for living room.
HD DVR
HD sat receiver
Escient Se-D1 connected to 1 Sony CX777es.
Xbox 360 (also as a media extender.)
Sling link for internet access.